Which is the Number 1 Best Tile Adhesive?
bwdenduring Typical damage screed shot right down to wooden suspended floor we used a flexible screed to build floor up.
bwden newsection This section was new in a long corridor lifted the original tiles for use to restore original sections. These were cut from 6x6 the original were 6.5 inches sq. so would have needed a new mould making to produce same size. Conservation officer let us use new as long as they looked good enough to match in as the building was listed.
BH porchb4 This porch had original tiles ripped out in late 1960, so we didn't know what the floor looked like but i think the new floor with an encaustic panel works well.
Bwdenporchafter New porch floor see before for details.
bwdenduring Typical damage screed shot right down to wooden suspended floor we used a flexible screed to build floor up.
Belfast 1 Mosaic floor in Belfast Harbour most of the floor sections had lifted in a typical dome fashion. we used a pressure gun to inject an ardex adhesive under the affected areas we re-fixed approx 40-50 sq mtres a day. beating any other Co for time scales.
Wigan Floor this floor was dropped into the cellar below all the joists had rotted. we used a new beam & block floor and screeded with Tilcon fibre screed. cleaned the thousands of tiles and re-fitted them.
welsh hotel aft pic this floor was so covered in paint & crap that the colours were hard to even distinguish.
T

bwdenduring Typical damage screed shot right down to wooden suspended floor we used a flexible screed to build floor up. | Tiling Advice | TilersForums.com | Images & Downloads - TilersForums.com

  • Tenchman
There are no comments to display.
TilersForums.com; Made BY Tilers FOR Tilers
UK Tiling Forum by Tilers Forums
uHeat Electric and Water Underfloor Heating
Wetroom Products And Shower Tray Formers

Advertisement

Media information

Album
Restoration projects & others.
Added by
Tenchman
Date added
View count
407
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Top