Floor after I'd made some initial remedial making good orks to the tray with Mapei Keraquick. I also filled the gap under the gully and filled the gap at the bottom of the plasterboard.
I paint a coating of Mapegum to either side of all internal corners and bed in the Mapeband, that I have previously cut to length. I always use either the flat side of my serator or a grouting float to make sure this is firmly adhered to the coating, flat and air bubble free.
Not great!!
Out of level gully with gap underneath.
Floor after I'd made some initial remedial making good orks to the tray with Mapei Keraquick. I also filled the gap under the gully and filled the gap at the bottom of the plasterboard.
How the builder left it.... Not great - screed thrown in, gully out of level and 25mm gap around the bottom of the plasterboard
M

Floor after I'd made some initial remedial making good orks to the tray with Mapei Keraquick. I also filled the gap under the gully and filled the gap at the bottom of the plasterboard. | Tiling Advice | TilersForums.com | Images & Downloads - TilersForums.com

There are no comments to display.
TilersForums.com; Made BY Tilers FOR Tilers
UK Tiling Forum by Tilers Forums
uHeat Electric and Water Underfloor Heating
Wetroom Products And Shower Tray Formers

Advertisement

Media information

Album
Mapei Waterproof Tanking Kit
Added by
merlecollins
Date added
View count
482
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Birthdays

Which is the Number 1 Best Tile Adhesive?
Top