a little advice on travertine needed

L

lcjohno

TF

0

511

Preston

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #1 of 13

Hi all,

I have recently just tiled this travertine wetroom, all is good and the customer is well chuffed. The little problem i have is where the sink sits the peice of trav its sat on is just slightly overhanging the tile underneath it by about 1/2mm. My question is, whats the best way to rub the tile down so there's no lip/overhang? I dont want to use a grinder really to keep dust down, i'm i right to use wet and dry paper? what grade, in what order? how long do you think it will take, cheers.

 

L

lcjohno

TF

0

511

Preston

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #2 of 13

dont know whats happend here, i'll have to re do it.

 

L

lcjohno

TF

0

511

Preston

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #3 of 13

no, it was my computer on a go slow, ignore second post, still need info on original questions please :smilewinkgrin:

 

M

Marcusko89

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #4 of 13

I would advise a polishing pad on a grinder, maybe have somebody hold a hoover near while your doing it to keep the dust at a minimum ...

 

M

Marcusko89

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #5 of 13

If you do it by hand its going to be very difficult to make it look right , can you remove the front peice ??

 

D

DHTiling

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #6 of 13

Silver trav.. nice..

1/2mm is not a lot..?..

IMO i would leave it if not noticeable.. because you will have to do a lot of work to rectify a small problem.. S

 

D

DHTiling

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #7 of 13

Ahh right i see where you mean now.. on the front of the sink block..

That is easy to do.. Use 50 grit paper to take the tile back to flush and then go up in grades to bring it back to honed finish..

so 50 grit:80 grit:120 grit:200 wet and dry and then finish with 400 wet and dry... that should leave it looking good.. make sure you do not sand the sides or top pieces.. the colour shading in that trav is sufficient to blend..

 

L

lcjohno

TF

0

511

Preston

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #8 of 13

the customer has noticed it, its on the right hand side of the sink (the middle picture) He's told the plumber it leaves a slight shadow when the light above mirror is on. I've got the main bathroom to do aswell at the same house next week in the same trav, might talk to customer and see if he can live with it, if he cant i'll just have to sort it. If only real option is grinder then thats what i'll do??

 

D

DHTiling

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #9 of 13

The corner looks to be chipped as well.

 

M

Marcusko89

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #10 of 13

Replace the front peice if its possibe without damaging the others , might be a better option .

 

L

lcjohno

TF

0

511

Preston

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #11 of 13

cheers dave, it does look like front on pics but its the right hand side he's on about, i've not got mirror light on on pics

 

D

DHTiling

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #12 of 13

Marcusko89 said:

Replace the front peice if its possibe without damaging the others , might be a better option .

Click to expand...

It could be that the top piece is cut slightly short and that the front piece might not go any further back... hence sanding it back... just a thought..

 

D

DHTiling

• Nov 3, 2011

• Facebook Twitter Reddit Pinterest Tumblr WhatsApp Email (needs to be genuine, the forums won't show unless you verify the email) Share

  Copy link
• #13 of 13

lcjohno said:

cheers dave, it does look like front on pics but its the right hand side he's on about, i've not got mirror light on on pics

Click to expand...

Which ever side it is, it is the same process.. dress the edge back to suit.. and to remove that small chip on the corner , you could take off the arris..