Minmax89
TF
- 15
- 158
3-5mm of cement onto a wedi type wet tray?
Oh-oh!!
THAT'S my concern. Will be chatting to them today to find out if that's ok...
follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_may_not_be_available_in_some_browsers
Discuss building a wetroom finished with Microcement in the Tanking and Wetrooms area at TilersForums.com.
3-5mm of cement onto a wedi type wet tray?
Oh-oh!!
Did you notice the grey sofa in Isomats meeting room Geoff?
That’s just a block of polystyrene sculpted in to shape and covered in Microcement. Bit hard to sit on, but it’s certainly crack free.
All their sinks are custom made, and are all constructed from mdf and again coated in Microcement, it’s a pretty amazing product.
THAT'S my concern. Will be chatting to them today to find out if that's ok...
Well North Wales is almost Dublin isn’t it? HahaOf course. Totally agree.
But we’re in Dublin and as it’s still a relatively new product we did the normal thing of asking the supplier to recommend a fitter. And we got one that we could go see their work. Based on that the client backed off
So bring him over!
If client wants specialist finishes, he needs to be prepared to pay for it.
Hi guys.
So, I've been asked to do a bathroom for a customer but I'm not sure the best way to go about it.
It's an ensuite in an old georgian house, 1st floor. I went to see the job a few weeks ago but could actually get into the room as it was full of building materials (they're renovating the place piecemeal really)
The room is 3.1m x 1.2m. It currently has a bathroom suite in it. What the customer wants is a wetroom (shower one end, wall mounted double basin, back to wall toilet, etc.). However, it is not getting tiled. They want to use a product called Microcement on the walls AND floor to give a polished concrete look to the whole place. The customer has spoke to the supplier in Ireland and they've said its completely waterproof and will be fine for the floor too (as part of an already tanked wetroom, etc.)
So, I'm a builder who normally preps a wetroom for my tiler and I'd usually follow a plan like this:
wetroom former. 24mm at the edge supported on ply between joists, etc.
18mm ply on rest of the floor. 6mm marmox board on that to meet former.
All joints taped, followed by tanking solution.
But I'd do all that ready for tiling. Has anyone used this Microcement or anyone got any practical advice to approaching this job?
This is the stuff:
Microcement Wall and Floor Kit, Beton cire, Micro cement, Micro screed - https://www.imperaitalia.com/product/microcement-floor-wall-kit/
Many thanks!
Adam
talk to us Adam, we have and we can advise
Reply to building a wetroom finished with Microcement in the Tanking and Wetrooms area at TilersForums.com