9' carpet to tile trim needed

[caliperkid]

hi all got a kitchen floor to tile were the customer wants a 9' silver carpet to tile trim to seperate kitchen from open plan dining room ! i know they used to do an 8' trim but never seen one any bigger,just trying to get something without a joint,ps ive suggested a hardwood threshhold but shes having none of it. any help welcome:mad2:

 

[Dan]

6 and 8' are really common but I don't ever recall seeing a 9' one!

If you fail here, checkout the Flooring Forum too mate. They're mainly carpet fitters there.

 

[caliperkid]

cheers dan will do

 

[SandyFloor]

9ft (2700) is a standard size....honest

 

[david campbell]

Diatech | construction cutting & tiling
try here i'm pretty sure they do sizes to suit

 

[SandyFloor]

Z-edge door bar CARPET to LAMINATE / TILE Silver 2700mm on eBay (end time 11-Oct-10 15:50:22 BST)

Just posted this as an example but it will be available from any flooring wholesaler. 2700 is about 8'10"

 

[SandyFloor]

The common depth is 8mm but some wholesalers stock 14mm and more. I use 14mm for 18mm wood floors. It can easily be manipulated to adjust the depth. When you fit it take a piece of timber about 400mm long and place it on the surface and tap it with a hammer and it will tighten down to the carpet.

 

[caliperkid]

thanks sandy checked out the ebay trim just what im lookin for your a life saver! and thanks dan i noticed you put a thread on floor forum for me "top fella"