Ahesive and Grout

[MIKE1]

I have my 1st job .Customer wants bathroom tiling with 400 * 250 tiles with a bit of a mozaic arround sink, they have bought Unibond adhesive and grout all in one.
Is it any good or should I go and buy bal grout and adhesive separate an do you think 2 or 3 mm spacer for walls.These questions might be daft but I don't want to mess up.

 

[DHTiling]

Tell the customer to take it back...load of cack.......

400x250....mmmmm....you will be better off using BAL ctf3 and superflex grout....or if the tiles are porcelain then BAL single part flexi .....same grout....

 

[GazTech]

I have my 1st job .Customer wants bathroom tiling with 400 * 250 tiles with a bit of a mozaic arround sink, they have bought Unibond adhesive and grout all in one.
Is it any good or should I go and buy bal grout and adhesive separate an do you think 2 or 3 mm spacer for walls.These questions might be daft but I don't want to mess up.

Sack the unibond and use Bal separately.3mm spacers is fine,good luck.....Gaz

 

[Unregistered]

Tell the customer to take it back...load of cack.......

400x250....mmmmm....you will be better off using BAL ctf3 and superflex grout....or if the tiles are porcelain then BAL single part flexi .....same grout....

Thanks for the help.......Mike

 

[DHTiling]

you not logged in mike...

 

[james]

im not a lover of ctf i like webber standard gear more and bal rapid set or white star if its tub gear.

 

[brian c]

Do as the guys say and take it back,you will be doing yourself a massive favour.

 

[tilermandan]

good advice ditch 2 in1 not the professionals choice. try mapei d2 waterproof adhesive, high initial grab and easy to use. if porcelain use single part flexi but i recomend wall grout from n&c nicobond.2-3mm spacers are perfect for the job.good luck let us know how you get on mate!