ats bullnose tool

[johnryan]

hello all, just thought i'd put a post up about the bullnose tool for a grinder that i got from ats recently.
after first rate advice from alan, i got the starter set they recommend, and here's a few pics (unfortunately phone doesn't take very good pics) of the first time i used them







the steps there, were just made up from leftovers, and done as an afterthought, but look really good and the pic doesn't do them justice really. also did another marble bathroom, but pics are too blurry to see anything. the bullnose tool and the dry polishing pads made easy work of both the trav and the marble. the detailed advice given from alan was spot on and the money definitely well spent. just wish i'd known about them before now. and once again for alan, a big thanks for all the help. cheers mate.

john

 

[Concrete guy]

Thanks for taking the time to post this up John.

 

[johnryan]

no problem alan. need to give you a call tomorrow to get some hole cutters, most of my old ones just about ready for the scrap heap now. was wondering if you'd heard any more about a vacuum fitting for the makita too. just bought a wet and dry vac so would be very handy if one became available. need a good marble blade for my grinder too, so any advice would be greatly appreciated. currently using a rubi cpa blade on my wet cutter, but was hoping you may have something better that i can use on my grinder.

 

[Concrete guy]

Do any of these items look like what you're after for dust extraction John? I can ask Makita for prices and availability and if any of the will fit a 9565.

http://www.makitauk.com/pam/custom/media/literature/accessories/large/AccessoriesHi_123.pdf

We can discuss the drills and blades when you call.

 

[johnryan]

yes that's exactly what i was hoping you may be able to get . would be great if one will fit on mine. will call in the am for my drills and blades. cheers.

john

 

[johnryan]

and found this from the photos of the other bathroom. didn't come out so blurry as the others;

polishing pads brought the marble up very nicely

 

[Concrete guy]

yes that's exactly what i was hoping you may be able to get . would be great if one will fit on mine. will call in the am for my drills and blades. cheers.

john

Is the dust extraction for when you're cutting rather than polishing/grinding?

 

[johnryan]

Is the dust extraction for when you're cutting rather than polishing/grinding?

yes mostly, i've got a job coming up in a couple of weeks, in regents street so all cutting will have to be done inside, so anything that can help with dust is a bonus. will have a wet cutter there, but i use my grinder a lot too, so the dust will be a big problem for me . also lots of profiling, though that doesn't seem to be too much of a problem as the dust levels are pretty low doing that.

 

[Concrete guy]

I think this is it, it seems to be the only one available to fit 125mm.

Makita UK - 192188-1 - Dust Extraction Guard - Dustless Guard

I'll ask how much they are tomorrow.

 

[Chalker]

I think this is it, it seems to be the only one available to fit 125mm.

Makita UK - 192188-1 - Dust Extraction Guard - Dustless Guard

I'll ask how much they are tomorrow.

found here too, nasty welding!
Makita 192188-1 DUST EXTRACTION GUARD (Model 9005B) by: Makita - UKtools Limited

 

[Concrete guy]

found here too, nasty welding!
Makita 192188-1 DUST EXTRACTION GUARD (Model 9005B) by: Makita - UKtools Limited

Not cheap either is it. That's almost half what the machine costs.

I'll see what kind of price Makita come back with.

 

[Tile Marble Granite]

amaizing tools, imported mine from US... http://www.customtilemarblegranite.com/ https://www.facebook.com/TileMarbleGranite