ATS hole cutters..

[DHTiling]

Anyone else having probs wearing these hole cutters out... they just cut hole after hole and no sign of wearing them out yet..


Also just to point out , i have no affiliation with ATS or get any freebies... just pointing out a bloody good product and makes a change for something to do what it says on the tin...

I have tried a few makes now and these are the only ones that seem to last..

 

[PaulSmith]

Happy with the two I just got from ATS. One being a 120mm.

 

[Ian]

Some of mine have done 30+ holes, I even used one dry the other day coz I was being lazy, still didn't die!

 

[DHTiling]

I use them dry on ceramics and softer stones and wet with porcs etc but they just refuse to die lol lol ... Not that I am complaining though

 

[Peter]

Bought a load off Alan last September and have been doing a few holes a week since. Should get til Christmas out of them. Easily over 100 holes in mostly porcelain.

 

[Spud]

the grinder blades are good too

 

[DHTiling]

the grinder blades are good too

I just bought one of the turbo ones , not used it yet ..

 

[peteablard]

They are great drills, I've got a 120mm which I haven't tried yet. I lent one of the smaller ones to a plumber on site, he did 24 holes dry through some ceramics then plasterboard and didn't stop until the ply at the back started burning, it was still like new!

 

[andy-p]

Where do you get the ats cutters from ?
The best hole cutters ive used are the rubi foragres range which i got from tradetiler
Im still using a 28mm cutter which is used nearly every day and i bought it years ago and there is still life in it yet
They may be pricey but are more than worth it for a bore size you use frequently...

 

[Concrete guy]

Where do you get the ats cutters from ?
The best hole cutters ive used are the rubi foragres range which i got from tradetiler
Im still using a 28mm cutter which is used nearly every day and i bought it years ago and there is still life in it yet
They may be pricey but are more than worth it for a bore size you use frequently...

From us.

< LINK REMOVED - DAN >

Thank you all for the public feedback, it is appreciated.

 

[Concrete guy]

They are great drills, I've got a 120mm which I haven't tried yet. I lent one of the smaller ones to a plumber on site, he did 24 holes dry through some ceramics then plasterboard and didn't stop until the ply at the back started burning, it was still like new!

That must have been a soft wall ceramic. 24 holes dry is some going.

 

[DHTiling]

That must have been a soft wall ceramic. 24 holes dry is some going.

Out of the 35mm hole cutter i got first time round Al . i have cut around 50 holes in porcelain G5 wet and approx 30 holes in ceramic and travertine dry... and it is still cutting into porcelain tiles no probs.. but i promise you i will KILL it one day :lol: but for a couple quid they cost , it is very good money well spent..

 

[Peter]

How does ATS make any money selling a low cost product that lasts forever? :lol:

 

[tommyzooom]

I've a few, and for the money, they're very very good

 

[One Day]

Why is the link gone?!
Seems daft having I thread singing the praises of a product and then censoring. Why make us have to search??