Black and White grout used together

[Hawkofeagles]

Hi Guys and Girls, I have a bathroom to do shortly and the customer is having mainly white tiles with 10 black tiles running virtical down one wall. Also on another wall they are using a border to run virtical to the right of a mirror. The tiles are 33cm x 50cm and they want them fixed portrait corner to corner.

Now how or what do you use to get a nice clean line between grouts where they touch??? as they want white grout where there are white tiles and black where there are black tiles...

 

[mikethetile]

grout the one and when its dry grout the other masking the dry grout to get a clean line

 

[united]

If I have the picture right in my head then I think it would look better all grouted in white

 

[White Room]

I'd be doing the black first

 

[DHTiling]

Yep agree.. black grout first

And some pics..:smilewinkgrin:

 

[Hawkofeagles]

I'd be doing the black first

That was going to be my next question but thank you in advance.

 

[Hawkofeagles]

And some pics..:smilewinkgrin:

Always try to get my pics on here Dave..

 

[Gazzer]

Always the darkest colour 1st or you will be touching it up forever.

 

[hillhead]

I used black today,bloody pig as usual on spongesrrr:

 

[Aston]

Always the darkest colour 1st or you will be touching it up forever.

as above
always the darkest colour 1st,
use masking tape as a barrier
then when dry, do you lighter colour

 

[richie b]

iv used 8mm alloy trim to break up the two different tiles and grout befor, looks great just put it in same as u would normaly at the end of one tille then continue tiling with the others, u only see a thin strip of it but works a treat, hope this makes sence