Circuit design for computer circuits. Discussion ThreadCircuit design for computer circuits. Electrical Advice
Hi Guys,
I'm currently designing an installation that will be used to configure multiple pieces of electronic equipment such as PC's, Servers, All in ones etc. Its going to be set up in bays such as the picture attached. With it being a full socket installation I was hoping for some guidance if I'm approaching the maximum demand calculations correctly with diversity. There are a lot of circuits as there will be a high amount of earth leakage from the equipment being used and IET suggesting to keep it less than 30% of the 30mA. I've attached a screenshot of the equipment being used. There is a possibility that all bays will be used at the same time with all the equipment plugged in and going. Any suggestions would be great. Thanks.
![[ElectriciansForums.net] Circuit design for computer circuits.](https://www.electriciansforums.net/attachments/screenshot-2024-12-11-at-19-28-28-png.119028/ "[ElectriciansForums.net] Circuit design for computer circuits.")
![[ElectriciansForums.net] Circuit design for computer circuits.](https://www.electriciansforums.net/attachments/screenshot-2024-12-11-at-19-34-34-png.119029/ "[ElectriciansForums.net] Circuit design for computer circuits.")
Circuit design for computer circuits. for the original thread on Electricians Forums
Hi Guys,
I'm currently designing an installation that will be used to configure multiple pieces of electronic equipment such as PC's, Servers, All in ones etc. Its going to be set up in bays such as the picture attached. With it being a full socket installation I was hoping for some guidance if I'm approaching the maximum demand calculations correctly with diversity. There are a lot of circuits as there will be a high amount of earth leakage from the equipment being used and IET suggesting to keep it less than 30% of the 30mA. I've attached a screenshot of the equipment being used. There is a possibility that all bays will be used at the same time with all the equipment plugged in and going. Any suggestions would be great. Thanks.
Circuit design for computer circuits. for the original thread on Electricians Forums
