Classi Seal

[chrisroe]

Anyone else come across this stuff The plumber i use always uses it behind the shower trays and baths and ive got to say it v v good

2m lth today cost £ 15.44 inc AT

Classi Seal ® Flexible Waterproof Upstand

most plumber mercients should stock it

i still tank and mapieband on top but everylittle helps

 

[White Room]

It only seems to go up the wall a couple on inches and would need sealing between bath and the Classi seal

 

[hillhead]

There is plenty of it used over here Chris,
It sticks really well to the bath and tray etc, i always silicon between it and wall and a small bead between bath/tray and the classi seal but it's a great piece of kit.
All plumbers should use these IMO.

 

[chrisroe]

There is plenty of it used over here Chris,
It sticks really well to the bath and tray etc, i always silicon between it and wall and a small bead between bath/tray and the classi seal but it's a great piece of kit.
All plumbers should use these IMO.

same here great bit of stuff

 

[tommyzooom]

There is plenty of it used over here Chris,
It sticks really well to the bath and tray etc, i always silicon between it and wall and a small bead between bath/tray and the classi seal but it's a great piece of kit.
All plumbers should use these IMO.

It's made in Dungannon iirc Joe
sticks like s***e to a blanket
I use abit of silicone too

 

[hillhead]

Didn't know that Andrew, they're always fitted before i get there and they sure do seal the joints up well.
They don't only go up the wall a couple of inches, they are a couple below too and well stuck guys.

 

[Mike]

my plumber swears by them, he was telling me about them last week never seen them myself.

 

[doug boardley]

but for a standard bath 1700 x 700, surely you'd need 2 rolls then?

 

[chrisroe]

it comes in diff lths

 

[doug boardley]

it comes in diff lths

ah, I assumed it was only 2m lengths

 

[chrisroe]

4 Different Roll Sizes: 2m, 2.5m, 3.2m, 4m, 12.5m (other roll lengths available on request.)

 

[redlee]

Never used it always seal trays and baths with silicone before tiling.

 

[Stewart]

All my wet areas get tanked so no need for it. Have seen it fitted by a few plumbers but was so badly installed I had to remove it.