door strip with raised floor....

[Mr Tiler]

hello people just wonderd what was the best option when fixing in a door strip between carpet and raised tile.... is it just a case of having to be a slight slope? cheers

 

[Marksmithtiling]

Z bar or Multi height "T" bar are the ones to use. Usually get multi height from wickes expensive but local and easy to use

 

[Mr Tiler]

the carpet is not close enough to go under one of there I think mate tbh

 

[Gazzer]

How close is the carpet to the tile then ?

 

[Mr Tiler]

it doesn't say the width on wickes but the distance between tile and carpet is 21mm.... the height is 19mm which is just about in the specs lol.

 

[Gazzer]

Then it should cover.

 

[Mr Tiler]

ok mate

 

[Gazzer]

Usually aim for a 10mm gap but without seeing what you see its hard to give any more advice.

 

[Mr Tiler]

il put a pic up later Neale got to go and see a man abut a dog.

 

[Chalker]

If its a big step I tend to plane down a 60mm wide piece of hardwood from to thickness of the tile and substrate and champher it down to carpet thickness.
I have also used a similar method to these. SOLID OAK L SECTION DOOR THRESHOLD - 0.9M - UNBEATABLE QUALITY - FREE P & P | eBay

not worth making on at these prices.