7
74ns
Hi Everyone,
I have been trawling through the site looking for answers and think I now know roughly whats need for the job but wanted to confirm with experts... already been to a few local tile shops and got conflicting advise..so not convinced.. your knowledge and advice would be most welcomed!
See photos..
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
We are planning to install a walk in shower 1700 x 750 along the back wall, so the same area needs to be tiled, tiles most likely to be used are 600 x 300 Slate from Tile Giant, I would need to replaster board and then use Hardiback Board 500 for the area to take the weight of slate? Best Flexi to use? what size trowel would be required? the rest of the walls are to be plastered and painted.
Flooring, same Slate but possibly 300 x 300 (from Tile Giant again), the floor is approx 22mm think tounge and groove chipboarding (of which some will have to be replaced due to previous tiler going down directly to it) once replaced cover with Hardiback 250? Best Flexi to use (same as wall use??) what size trowel would be required?
Also a recommendation on the Grout (Grey) would be appreciated..
We already have Litholen Stain Stop for the protection of slate.
Hope everything is clear...
Thanks in advance....!!
Neil
I have been trawling through the site looking for answers and think I now know roughly whats need for the job but wanted to confirm with experts... already been to a few local tile shops and got conflicting advise..so not convinced.. your knowledge and advice would be most welcomed!
See photos..
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
ImageShack® - Online Photo and Video Hosting
We are planning to install a walk in shower 1700 x 750 along the back wall, so the same area needs to be tiled, tiles most likely to be used are 600 x 300 Slate from Tile Giant, I would need to replaster board and then use Hardiback Board 500 for the area to take the weight of slate? Best Flexi to use? what size trowel would be required? the rest of the walls are to be plastered and painted.
Flooring, same Slate but possibly 300 x 300 (from Tile Giant again), the floor is approx 22mm think tounge and groove chipboarding (of which some will have to be replaced due to previous tiler going down directly to it) once replaced cover with Hardiback 250? Best Flexi to use (same as wall use??) what size trowel would be required?
Also a recommendation on the Grout (Grey) would be appreciated..
We already have Litholen Stain Stop for the protection of slate.
Hope everything is clear...
Thanks in advance....!!
Neil
