Favourite Trowel For Porcelain Floor Tiles?

[Flintstone]

whats your favourite trowel for getting good coverage on porcelain tiles say 300x300 - 650x450?

I've been using a 15mmx15mm (I think) square notch for some time but I think it could be better.

 

[White Room]

I like the Genesis Tiger trowel and a Ragni 9mm for walls..

 

[Chalker]

Here's my favorite towel.
Oh. You said TROWEL!

 

[kevsalt]

mmm wonder what size notches she has

 

[Flintstone]

Ordered a tiger trowel today so will see how that goes.

 

[One Day]

I use an 8mm Rubi stainless trowel on pretty much anything that's reasonably flat. Large format, i like my 12mm on the floors. I back skim most tiles and get good coverage.

 

[Qwerty]

Ordered a tiger trowel today so will see how that goes.

How did you get on with the tiger trowel?

 

[Bill]

How did you get on with the tiger trowel?

It was Grrrrrrrrreat.

 

[Flintstone]

How did you get on with the tiger trowel?

I've used it for most of my tiling since I got it, it's great for when the surface is bang flat and tiles up 600x300, with a back butter. I still prefer the 12x12 notch for larger tiles or when there's some unevenness in the floor.
I think tiger trowel is great for walls.

 

[Spud]

It was Grrrrrrrrreat.

Made me laugh

 

[Kyle Knowles]

On floors I use a 11 inch ox 12x12mm and a marshalltown 18 inch 12x12mm

 

[Kyle Knowles]

I've also got a tile rite 20mm deep round notch for any real big stuff or super thick stone

 

[Rosco100]

Tiger trowel for floors

 

[Kyle Knowles]

I've never used a tiger trowel I think I'll. Order my self ome when I get paid off the job I'm on

 

[White Room]

I've also got a tile rite 20mm deep round notch for any real big stuff or super thick stone

As in 900x900mm perhaps.

 

[Stef]

I've also got a tile rite 20mm deep round notch for any real big stuff or super thick stone

You sure it's 20mm deep?
I've got a 20mm round notch but it's only 10mm deep.
It's a bright ideas trowel.

 

[Kyle Knowles]

Yeah I'm sure it's 20mm deep mate I'll post a picture of it tomorrow it's at a job buried in my toolbox

 

[Flintstone]

Think I have one of them too Ile look tomorrow, it's a beast.

 

[Kyle Knowles]

I want a 15mm square notch any ideas if or where I can buy one

 

[Time's Ran Out]

I want a 15mm square notch any ideas if or where I can buy one

Just make one with an angle grinder

 

[Stef]

I buy 10mm bright ideas trowels & grind them out to 12 & 15mm.

 

[Flintstone]

I never use this, you pour half a bucket of adhesive out and it disappears in about 30 seconds

 

[macten]

Call that a trowel?
Now this is a trowel:

 

[Flintstone]

I could do with that to get over some of the surfaces I'm asked to tile

 

[Qwerty]

That pic has made my day!!!

Little Britain sprung to mind!