Hello and some help please.....

[S34n]

My better half loves the Topps Tiles Stratum Grey tiles which i now have to install into my small bathroom.
I've read previosu posts on the grout issues and I'll tackle that in due course; but in the mean time I'm trying to figure out the best way of applying the silicon sealent around the bath and sink so that it looks a decent job.

As the tiles are textured; I know I'm not going to get the usual straight sealent lines; so any advice?

Many thanks in advance.

 

[White Room]

Keep the silicone to an absolute minimum in the joint and use water mixed with a drop fairy liquid in a spray bottle, then strike the silicone.

 

[thompsonbrown]

They say not to use soapy water if using a silicone tool. I'm with whitebeam, I find it helps.

 

[Time's Ran Out]

Spit!
Works the best.

 

[TJ Smiler]

a silicone tool will help and i also use the spray bottle with a bit of fairy liquid

 

[Qwerty]

As above