Hello everyone!

[jontee]

Can someone advice please, Im fitting a kitchen at the moment, while doing this the customer has asked me to tile his wooden floor, which is very sturdy and well supported with joist support walls underneath, t&g flooring about 20mm thick well screwed, then 12mm of exterior ply glued and screwed every 150mm. Products and techniques have changed alot since ive done a wooden floor, could some one advice the best tile adhesive and bonding etc for this situation, ( ply could have thicker but isnt, could have used hardy backer, but never used before. )

Regards jontee

 

[Dan]

Hi Jonte welcome to the forum.

I'll let the lads advise you on what adhesives are best to use etc.

But thanks for signing up.

 

[jontee]

thanks.

 

[suave]

welcome! single part flex adhesive (powder type)

 

[aphilp]

Hello and welcome

Anne

 

[Ian]

Welcome along to TF.

 

[DHTiling]

Hello and welcome... slightly under BS thickness .. I would use an s2 like above.. Mapei ultraflex S2 quick is another brand.. MAPEI adhesives sealants chemical products for construction