Hello new DIY'r here.

[Gavin]

Hi all, JUst saying hello to all.

Came on here looking for advice about the Victorian tile problem I had, dated 10-6-10.

Had great response..probally took on more than i can chew but always willing to learn and get advice from people who are kind enough to share their skills with others.

Again thanks again and if anyone can advise what brand grout to use for this problem I would be gratefull as I will hvae 1mm joints and can only find grout for 2mm or over

Cheers again

Gavin

 

[Dan]

Welcome to tilersforums.com | Tile Forums | Tiling Forum!

Hi Gavin and welcome to tilersforums.com!

 

[Time's Ran Out]

:welcome:Gavin - I know ardex make a Fine grain grout in grey - it would be suitable for this size joint.
IMHO you will be able to use a 2mm grout ok as you have to remember its going down the joints to a depth of 8+mm as long as you make sure it is thoroughly push into the joints with a good action.
Don't forget the pictures on completion.

 

[The Legend; Phil Hobson RIP]

:welcome:Gavin

 

[DHTiling]

:welcome::welcome:

 

[Diamond Pool Finishers]

hi Gavin:welcome:

 

[White Room]

Hi and welcome

 

[diamondtiling]

Welcome to the forum Gavin.

 

[faithhealer]

welcome to the forum gavin

 

[Ken Bruty]

:welcome:gavin