G
gomez
Hi all.
Great site.
I'm about to start tiling my bathroom with 9mm 600x300 full bodied porcelain tiles. Here's the question I need to cut 10mm to 20mm off the long edge of a number the tiles ( about 12), I would assume that using a manual tile cutter is not a viable option, however you may know better. I have a small flat bed cutter with a 180mm disc which with a new disc may be a slow option. I've done plenty of ceramic tiling but this is my first go with large porc. tiles. Also wondering does anyone have any ideas about a specialist tile hire outfit around the Wirral, the normal hire shops usually have clapped out small battered tools in my experience, (looking for a good manual tile cutter to handle 600 porc. tiles).
Any ideas or advice would be greatly appreciated.
Thanks for your attention.
Great site.
I'm about to start tiling my bathroom with 9mm 600x300 full bodied porcelain tiles. Here's the question I need to cut 10mm to 20mm off the long edge of a number the tiles ( about 12), I would assume that using a manual tile cutter is not a viable option, however you may know better. I have a small flat bed cutter with a 180mm disc which with a new disc may be a slow option. I've done plenty of ceramic tiling but this is my first go with large porc. tiles. Also wondering does anyone have any ideas about a specialist tile hire outfit around the Wirral, the normal hire shops usually have clapped out small battered tools in my experience, (looking for a good manual tile cutter to handle 600 porc. tiles).
Any ideas or advice would be greatly appreciated.
Thanks for your attention.
