how do i tile halfway up a window reveal

[chrisgolf]

hi im chris new member i want to know how to join the tile trim half way up a window reveal where there is one verticle and two horisontal trims meet:smash:

 

[burncross]

you can buy corner/quadrant pieces for this, gives a much neater professional job
use genisis or homelux, they both supply quadrants

 

[hillhead]

Or you can mitre the vertical to the short recess trim and cut the wall one square,everyone has their own way of doing it but as long as it stays neat and tidy it'll look good.

 

[david campbell]

will only use corner pieces if the window reveal is not running true,otherwise it's a mitre most of the time!

 

[DHTiling]

Hello chris and welcome to tilers forums..

 

[john32145]

Search for 3way mitres there was a good post a few weeks ago.unk:

 

[Uheat]

hi and welcome.

have a look at http://www.tilersforums.com/tiling-forum/3605-cutting-tile-trim-3-way-mitre.html

 

[Leatherface]

Hi mate
personally I prefer to use 3 way corner joints wherever possible
Regards

 

[graham31]

Hi and welcome to tilers forums...............

 

[White Room]

Hello and welcome Chris

 

[Olz]

Welcome to the forum Chris, has that answered your question,

Take some friendly advice and practice, practice, practice before you try and stick them to a wall.

 

[LM Ceramics]

welcome to the forums

 

[Derry]

Hi, Welcome to the forums :yes: