Ideal logic C35+ with Halo Lite RF ( not wi-fi) Discussion Thread
Trying to find an answer to my question regarding "load compensation" Once Halo target temp of 20*c is reached , + another 5* (20'5*c) and the red flame in the display and green "demand" light
on the reciever go out, the boiler still kicks in and out every 5- 15 mins until end of program. From what i've read, this is due to the "load compesation" built into the Halo prt.
My question is.............when the load compensation is active ie; boiler kicking in when stat is off (no demand) and target temp reached. Will the red flame symbol and green demand light on reciever be on or off . Bascicaly, in a nutshell, the boiler is kicking in when there is no Demand lights or flame symbol.
Thanks peeps.
Ideal logic C35+ with Halo Lite RF ( not wi-fi) for the original thread on Plumbers Forums
Trying to find an answer to my question regarding "load compensation" Once Halo target temp of 20*c is reached , + another 5* (20'5*c) and the red flame in the display and green "demand" light
on the reciever go out, the boiler still kicks in and out every 5- 15 mins until end of program. From what i've read, this is due to the "load compesation" built into the Halo prt.
My question is.............when the load compensation is active ie; boiler kicking in when stat is off (no demand) and target temp reached. Will the red flame symbol and green demand light on reciever be on or off . Bascicaly, in a nutshell, the boiler is kicking in when there is no Demand lights or flame symbol.
Thanks peeps.
Ideal logic C35+ with Halo Lite RF ( not wi-fi) for the original thread on Plumbers Forums
