Karl dahm Silicon set

[siremastimus]

Hi bought this set on the recommendations it's received here, just after some advice on what sizes I should use for internal corners and around the bath, is it 7mm for internal and 10mm around the bath? Thanks

 

[White Room]

Depending on the size gap you have to fill....

 

[nakhodka2002]

I found this kit very useful.

 

[Diamond Pool Finishers]

i must admit i 'am crap at siliconing ,would anyone like to wright a BLOG/master class for us that don't do much of it ?

 

[Tony73]

have no problem with Silicon. allways use 1inch masking tape. And do 3-5mm thick.

 

[scottyh]

no need for masking tape lads as long as you can get a consistant bead then spray with washing up liquid mixedwith water in a spray bottle get a piece of 5-10mm lathe (10mmx10mm) stick lol sharpen at 45 degrees to a point drag along Silicon to remove excess lick your finger and smooth job done