marmox corners

[actile2015]

Hi, I'm in the process of installing a wetroom based upon marmox showerlay. base down and multiboard up. question i have is around the waterproofing, for which i have the marmox waterproof tape and internal corners. Can anyone confirm what the right procedure is to secure the internal corners in please? their youtube video appears to secure them with their own multibond sealant/adhesive, but i've also seen tile adhesive used on other systems. any thoughts appreciated.

cheers

 

[Old Mod]

Have u not answered your own question!
With the words "other systems" each tanking system uses slightly different methods. Schluter for example uses Kerdi-Coll
For its tapes and pre formed corners.
Personally not used Marmox system but if it requires its own adhesive for the tapes and corners surely that's the way to go? Or spk with Marmox directly and take direction from them.
The trouble is with any system, if there is a failure and the correct procedure has not been followed to the letter then there is NO garauntee is there.
I know I haven't answered your question as u would have probably liked, but if I have any doubts over products my first port of call is always the manufacturer.
Good luck tho.

 

[Chalker]

When you look around. Different suppliers, state using diferent tanking. I find Ardex is a good product, and sticks to marmox very well. You can follow the instructions on YouTube.
Tile adhesive is not tanking!