Marmrox shower tray 1500 x 800

[kelvin]

Hi all,

just recieved my new shower tray this Arvo by the courier...upon inspection it was damaged to the end not the offset drain end.
my question is can it be used .....it's crushed on the end with 70mm slice into it about pencil width on one of the corners is there any way it can be repaired so I can use it or is it scrap....

cheers in advance tv....

 

[Qwerty]

Any photos?

Did you sign it as uninspected? Some companies even instruct customers to sign for as damaged to cover themselves!

 

[thompsonbrown]

I would ask for what you ordered.

 

[kelvin]

Hi yes I sent him a picture and he is sending out a new tray but I wanted to know if it fixable with a compound as I have another wet room to do and if so I could use it..or cut 75mm off the long end?

 

[Qwerty]

I could tell if I saw it

 

[kelvin]

Any photos?

Did you sign it as uninspected? Some companies even instruct customers to sign for as damaged to cover themselves!

How do you post a pic with iPad?

 

[kelvin]

Like that I guess...

 

[Qwerty]

Crikey!!!!! Looks like a great white has been at it! Only thing to do with that is cut off damaged area. It will still affect the fall to the drain though

 

[kelvin]

 

[kelvin]

Yes but would it be ok at 1400 mm as they do one like this from stock?

cant I use some slc to fill the void or anything else?

 

[Chalker]

Just buy a 20mm Marmox board and cut out the offending area. Stick own with adhesive, tape the joint and away you go!

 

[kelvin]

Thanks sounds like the silver lining I was looking for I will try that....

 

[kelvin]

Oh it's a 24mm tray... What shall I use to level it up with..?

 

[Qwerty]

Oh it's a 24mm tray... What shall I use to level it up with..?

Just use the equivalent thickness in layers of Marmox boards or build up the initial majority with ply, then Marmox board to end flush with the top surface of the former. Then tape and tank as stated previously