Marrazzi Tiles

[Stef]

Saw a post the other day about how good marrazzi tiles were.

Using 600x600 Oxitone grey marrazzi today & I was not impressed.
Pulled 1 tile out the box & it was 603, only using 3mm spacers, most were 600 but a few were between sizes..

 

[John Benton]

I am amazed Stef, I fix Marazzi regularly, and one of the things I like most is the consistent calibration.

Are you sure all batch numbers are the same, I've never come across this problem from this manufacturer.

 

[Stef]

I am amazed Stef, I fix Marazzi regularly, and one of the things I like most is the consistent calibration.

Are you sure all batch numbers are the same, I've never come across this problem from this manufacturer.

John I have used marrazzi a few times but not for a while & always thought they were fine.
I had a few bowed tiles in amongst the batch also. Fixed about 10m2, fixing 5m2 of 600x300 tomorrow so will see if it was only the 600s.

 

[John Benton]

Let us know how you get on, sounds like it could be a bad batch, bowed and mis-sized, slipped through QC.

 

[Stef]

Let us know how you get on, sounds like it could be a bad batch, bowed and mis-sized, slipped through QC.

Will do, should be out tomorrow but the "Triple Distilled" is going down far too easily..

 

[Del W]

Didnt have a problem with these last week.

 

[Chalker]

Nice ttiling. Horrible plumbing!

 

[Diggy]

Let us know how you get on, sounds like it could be a bad batch, bowed and mis-sized, slipped through QC.

I think the phrase manufacturers use is 'Modular' , or to you and me 'SAF' , sizey as f%$*.

Diggy

 

[John Benton]

View attachment 54435

Didnt have a problem with these last week.

Did the elephant in the bathroom cause any problems?

 

[Stef]

Got on better today,

Those 600s must have been a mis match of different batch numbers.

 

[John Benton]

Got on better today,

Those 600s must have been a mis match of different batch numbers.

Tadaaaah !!!!

Nice work Stef