my laser level has died

[Alan M]

send it in for calibration. there are several companies doing this.

 

[trustiling]

Which companies, And how much?

 

[squeaky]

ive got the Dewalt DW089k cant fault it . got it from the Dewalt spennymore store at a BIG DISCOUNT . http://service.dewalt.co.uk/Support...cationID=0325d809-dc9c-4b8b-ab3f-2308c28133b6[h=1][/h]

 

[Plitochnik]

I use bosch gll 3-80

 

[Chris_32]

ive got the Dewalt DW089k cant fault it . got it from the Dewalt spennymore store at a BIG DISCOUNT . http://service.dewalt.co.uk/Support...cationID=0325d809-dc9c-4b8b-ab3f-2308c28133b6[h=1][/h]

I also have this laser, does it all and very well made. would recommend if cost isn't an issue.

 

[swanman]

i have a level made by stanley

 

[Perry]

Cam I was using Petes (PJC) it's a good little laser.
PLS, can't remember the model though.
I was looking at the Dewalt 089k??
Think mines is 087 or 088, new Dewalt gives you square on floor & looks good.

Yes Steve it was a pls. all the shop fitters tend to use them or the hilti one.

 

[Time's Ran Out]

I have a length of tube I fill with water - it can be green if passed by the management!

 

[Perry]

I have a length of tube I fill with water - it can be green if passed by the management!

John I have only brought one since I started fitting the brick slips never used it for tiling. Because time is money.