Need help on tiling an exterior wall

[Baumy]

Hi there, I'm looking for advice on tiling an exterior wall with stone tiles and will be tiling onto breeze block, so any help will be appreciated.
Thanks

 

[Diamond Pool Finishers]

well i have never tiled on to breeze block but what i would do is rake-back the mortar -joints then re render with sand and cement then wait for it to cure this would give a much better sub straight to tile to ........

 

[Diamond Pool Finishers]

Oh & :welcome: to the forum

 

[White Room]

Hi and welcome.....as above the block work needs to be as flat as you like so a render would be the best option.

 

[DHTiling]

how high will you be tiling.?

 

[Diamond Pool Finishers]

i have recently used this on a job and it was great material ,and you will be-able to tile onto it after 2-hours hope this helps
http://194.223.92.131/pdf/Technical%20Data%20Sheets/B%20&%20C%20Technical%20Data%20Sheets/BAL_Quickset_Render.pdf

 

[White Room]

i have recently used this on a job and it was great material ,and you will be-able to tile onto it after 2-hours hope this helps
http://194.223.92.131/pdf/Technical%20Data%20Sheets/B%20&%20C%20Technical%20Data%20Sheets/BAL_Quickset_Render.pdf

How much a bag for that Dave.....

 

[Diamond Pool Finishers]

How much a bag for that Dave.....

sorry Mark, got side-tracked £19.49 from topps including Vodka And Tonic well thats what i payed in a rush ,if i needed a lot of it i would use, weber OCR or K-rend :smilewinkgrin: