Porcelanosa Firenze

[wayne]

Has anyone laid these tiles at all? They have loads of circles on them and the tiles interlock. Just wondering what spacers to use on them and if they will cut on a manual cutter cheers.

 

[mz30]

Yes use them all the time they interlock so no spacing needed (according to rep),they will cut on a manual cutter but if you are only doing a splash back etc you may want to use a wet saw as they do tend to splinter a bit.

 

[Diggy]

Cut them upside down ( ie score the clay on the back ) , works well on a sigma flat bed most of the time , particularly with a lot of those Porcelanosa tiles with patterny/ridgy/bumpy/crevacy face efforts.

Diggy

 

[Mr Tiler]

nice tip mate

 

[Stef]

They are a pain to cut but they are ok to fit.

A nice feature once finished..

 

[wayne]

Doing a full bathroom in plain white tomorrow. About 22 Sqm. What grout did you use for it?

 

[Stef]

Doing a full bathroom in plain white tomorrow. About 22 Sqm. What grout did you use for it?

White Bal wall grout, got it as smooth as I could & waited a while then just polished up, never sponged off & the grout clears up easily from the circles.