Quartz Tiles dull after grouting with mapeei epoxy grout

[chrislew]

Have laid quartz tiles down and grouted ,cleaned off grout as we went,theres now a bit of a dull finish on them but really sparkly when wet.Any ideas?

 

[Concrete guy]

Acetone (nail varnish remover) will clean quartz tiles as long as there has been no topical enhancer applied at the factory.

Test on an off cut first of course and if you find any of the actual quartz colour comes out then don't use it on the fitted floor.

You've probably got a residue remaining.

 

[chrislew]

Acetone (nail varnish remover) will clean quartz tiles as long as there has been no topical enhancer applied at the factory.

Test on an off cut first of course and if you find any of the actual quartz colour comes out then don't use it on the fitted floor.

You've probably got a residue remaining.

Thanks very much

 

[DHTiling]

I would say it is epoxy grout residue... use a suitable residue remover but as always test in an inconspicuous area first... majority of resin quartz should not have any sealer on it.

 

[White Room]

Could try some of this Fila CR10 - Epoxy Grout Residue Cleaner

 

[Mark@Fila]

If you need a sample of Fila CR10 then let me know

 

[chrislew]

Hi That would be really good,have you a website or telephone number to get in touch with you and an idea of prices as I have only got about 100 tiles 300 mmsquare to clean Thanks Chris lewis