Silicon in internal corners?

[Confiteor]

+++NEWBIE ALERT+++ +++NEWBIE ALERT+++ +++NEWBIE ALERT+++

Does anyone foresee any problems if I choose to use white silicon, as opposed to grout, for the vertical gap on the internal corners in a bathroom wall-to-floor tiling situation?

I thought the flexibility might be useful in case my walls ever move slightly due to humidity, slammed doors etc.

Using it a couple of millimetres proud of the tiles on both sides would also hide any ragged cuts.

Does anyone else do this?

 

[DHTiling]

hello mate. You should Silicon corners anyway as these act as movement joints...

There is a thread on the forum going into greater detail on this subject....dave...

 

[CJ]

Grout as per normal............then bead of clear silicon. Or white if white tiles

 

[grumpygrouter]

Personally would only use Silicon.

 

[Varley]

I only use Silicon aswell.

 

[Confiteor]

Excellent. Thanks.

I seem to have stumbled on to best practice purely by accident!