Table for setting dry cutter on

[Knifey_Spoony]

I had a great table for my cutter that i bought in Holland but recently had it nicked along with my cutter:mad2:

It was designed for a tile cutter and was perfect but i can't remember the name of the company who makes it so just looking for any table now for a 700 cutter.Trying to find a table on Google is difficult as it just brings up tables for wet saws.

Most of the other tables i have seen Tilers using in the UK have been quite low (about knee height),my old one was waist height so i didn't have to bend down at all.Can anyone recommend me one?

Currently just setting my cutter on the ground and the difference on my knees and back at the end of the day is huge.

 

[Chalker]

The kettler table is very good.
http://www.screwfix.com/p/keter-folding-workbench/56566

 

[Time's Ran Out]

I use my Dewalt stand with a plywood top cut to fit - ideal.

 

[Diggy]

Same as chalker , I use the ketter , only recently bought and use it every day now. Had my TXN 700 on it today . I've also had the 1200 on it to without much bother. Lightweight and sturdy and fits easyily in my Suzuki carry ( main reason I went for it ) .
Diggy

 

[White Room]

There's one of these from Germany http://www.ebay.co.uk/itm/361233415587?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[peteablard]

Keter for me too, I've also got an extra strong pasting table that I use if there is enough space, great for loading tiles onto to save bending down all the time

 

[tommyzooom]

+1 for Keter, I found it too high though, but was able to cut 60mm off the legs ( I'm a short-arse though)

 

[mma]

Same as chalker , I use the ketter , only recently bought and use it every day now. Had my TXN 700 on it today . I've also had the 1200 on it to without much bother. Lightweight and sturdy and fits easyily in my Suzuki carry ( main reason I went for it ) .
Diggy

Great little vans!! Had one for five years.

 

[mma]

I'd also recommend the Keter. Check the reviews on the Screwfix link!

 

[Old Mod]

As above, I have two! [emoji106]

As Neal says, B&Q £50

 

[Gazzer]

Keter for me too and my local B&Qs were selling them cheaper than Screwfix recently.

 

[Stef]

Another one for a Keter table. [emoji106][emoji106]

 

[Stef]

+1 for Keter, I found it too high though, but was able to cut 60mm off the legs ( I'm a short-arse though)

Tommy, did it affect the action when you folded the legs back in?

 

[tommyzooom]

Tommy, did it affect the action when you folded the legs back in?

Not at all. Remove the plastic cap off the ends, cut legs to suit, and replace caps

 

[Stef]

Not at all. Remove the plastic cap off the ends, cut legs to suit, and replace caps

Cheers for that, sometimes I feel that my table is slightly high, never thought about chopping the legs. [emoji106][emoji106]