Tile to carpet trim

[Julz77]

Morning all

Wonder if any of you know if or where I could get door trim to accommodate a 25mm difference between the tile and carpet?
Massive I know but room already boarded out and after ply+addy+tile its damn near 25mm diff!

Thanks all help always appreciated

Julz

 

[Bubblecraft]

Topps do Z transition bars in gold & aluminium finish which will take up your 25mm height difference. I'm sure a local tile shop or DIY shop near you will do one

Has the area already been tiled or are you doing your homework before you tile as there a plenty tiling floor trims you could use if you've not yet tiled

 

[Julz77]

Morning Bubblecraft

Thanks for advice!

Just doing my homework just now. Popping to CTD this afternoon, wasn't sure if a standard door trim would work ok. The Z ones look good too. But if I can pick one up at CTD that would be great.

Thanks for the help!

Julz

 

[Bubblecraft]

Other option would be to fit a wooden threshold bar 25 x 50 & then tile up to it. Would save having a 45 degree angle on a Z bar.

 

[charlie1]

Another cheeky little option would be use a 14 mm stick down bar the place a 10mm piece of wood onset the carpet!

 

[johnryan]

might want to have a look at these. i used one of these;
Schlüter-RENO-U/RENO-RAMP - Schlüter-Systems
before for a transition where one floor was 25mm higher than the next one and worked fine.

 

[Julz77]

Thanks for all the help and advice guys. ! :smilewinkgrin:

 

[Julz77]

might want to have a look at these. i used one of these;
Schlüter-RENO-U/RENO-RAMP - Schlüter-Systems
before for a transition where one floor was 25mm higher than the next one and worked fine.

Hi John
Thanks for the link, do you have a rough idea of price for them?

cheers J

 

[Julz77]

Another cheeky little option would be use a 14 mm stick down bar the place a 10mm piece of wood onset the carpet!

thats genius, have you used that option before ? does it look ok?

thanks !

J

 

[johnryan]

think a length of it was around 36 quid, and cut it down to the length you want. you can order them through ctd.