Wall tiling Setting out Advice needed

[PMM9BRO]

I'v attached a picture of a wall I'm tiling that includes my en-suite door, looking at it from left to write the widt is 940mm to the door, the door opening is 740mm and the other side of the door is 960mm, my tile widtht is 275mm, basically my question is to ensure i dont have really small cuts at each wall I will need to have cuts and either side of the door reveal, will tbhis look ok, any suggestions for layout would be welcome, idont require any advice for the height.

And can I just say this is a brilliant website!!!

 

[PMM9BRO]

forgot to include pic

 

[Mr T]

i would advise making up a gauge with a length and slap it on the wall to find a nice even layout

 

[Alan.P]

If my in head math works out, centre the wall and start full tile off centre.

 

[Gazzer]

 

[Alan.P]

On paper that leaves a 60mm cut off the tile to the left wall and a 40mm cut off the tile to the right wall. IF my 'scaled' drawing is right lol

 

[Mr T]

look at mr sir ramic with his detailed diagram lol

 

[Alan.P]

Nice one Neale, snuck that in when I was doing my origami lol

 

[Gazzer]

Of course it all depends how he want to tile the wall :smilewinkgrin:

 

[Mr T]

lol what programme is that mate? or what site?

 

[Gazzer]

 

[Gazzer]

lol what programme is that mate? or what site?

Precision Tile pro.

 

[PMM9BRO]

superb response from Sir Ramic!!! thanks for this

 

[Gazzer]

What size are the tiles and what architrave do you have as this would alter it.

 

[Houston]

center the door and work out from there