weight limits

[pipeline]

evening men... was thinking to myself the other day,, about liquid and on the roll waterproof membrane and how they effect tile weight limits and does it make any difference to the limits... as you are tiling on to a membrane and not to surface stated it in weights and limits guide.. thanks

 

[AliGage]

As far as weight goes itll only reallt need consideration if its going onto plasterboard. It would easily be less than 1Kg psm. Allow a kilo in your weights and you'll have it covered.

Always follow the manufacturers instructions when it comes to the prep of the substrate before applying your WPC.

 

[pipeline]

Hi aligage.. Thanks for reply but could u explain why i need to take more consideration when using wpc on plaster board.. Thanks

 

[White Room]

Gypsum plasterboard will absorb moisture like a sponge if water creeps through the grout joints...

 

[pipeline]

Ok i understand that... I just want to know if the 30kg psm weight limit applies to plasterboard even if it has a water proof membrane on it. Thanks

 

[White Room]

Is that a liquid membrane or the fleecy type...

 

[pipeline]

Hi white beam.. It is just a theoretical question.. I would mind knowing your opinion on both materials. Much appreciated thanks

 

[White Room]

Liquid would be next to nothing, the fleece would be about 1/2 kg m2 maximum including the adhesive used....plasterboard takes 32kg m2.

 

[Ian]

BAL state that their liquid kit (wp1) can hold up to 32kg per m2, it will be substrate dependant though, skimmed PB will still only be able to take 20kg tanking or not. So according to this data the wp1 kit won't be suitable for heavy stone even if it is fitted to a cement board, although the substrate can cope with the stone, the liquid membrane can't.

 

[pipeline]

Ok great. So whats the best surface to put heavy tiles on to.. Also do u do many jobs where the tiles weigh more than 30kg thanks

- - - Updated - - -

30Kg psm i ment

 

[AliGage]

Ok great. So whats the best surface to put heavy tiles on to.. Also do u do many jobs where the tiles weigh more than 30kg thanks

- - - Updated - - -

30Kg psm i ment

Over board with marmox and tape the joints. Marmox is uoto 62Kg and is fully waterproof.

 

[pipeline]

Liquid would be next to nothing, the fleece would be about 1/2 kg m2 maximum including the adhesive used....plasterboard takes 32kg m2.

So if a customer wants big tiles in a wet room say25kg psm how would u go about doing it. Thanks

 

[pipeline]

Thanks men much appreiciated

 

[The D]

Get someone that knows what they are doing!

 

[IHB]

Neither Schlüter-KERDI or Durabase WP publish weight restrictions on their web sites. Assume that means that they don't have one.