Wet room water proofing

[tileman]

Hello to all, this is my first post on the forum, I have been asked to quote to tile a wet room with a concrete floor and studding/plasterboard walls.
I haven't done one of these before, any help on how to go about it would be appreciated.
Both wall and floor tiles are ceramic.

Regards tileman.

 

[DHTiling]

hi tileman and welcome to forums.......

have a look at this thread first.....http://www.tilersforums.com/tanking-wetrooms/2776-wet-rooms-info.html

then have a look at the schluter site on wet rooms.....Schluter-KERDI-ST/-SC/-SR - Schluter-Systems

Homepage - Schluter-Systems



..............dave...


GOOD LUCK.......

 

[Cliff Anger]

Mapei do a wet room kit with all you need in a box and a leaflet showing build up etc .

 

[White Room]

My favorite bal wp1 never had any problems, They also do a kit. Found there fibre tape quite expensive, went to a car spares shop found somethink similar used for body repairs bought about a m2 for £3.50 then cut into strips for the corners and the whole piece for the floor or how many you need.