Wet tile cutter

[leslie]

Hi
About a year ago I asked opinions regarding Wet Tile Cutters, I was pointed towards the Briccolina with a blade size of (0150).
But I have not been very happy with it, I did write to the company I purchased it from but they were not interested.The motor itself is good and quiet, but trying to remove the guard is a mission and the side that lifts up for angle cuts keeps popping out of its clips. It was not a cheap cutter ,but i think it is time to get a new one, any recommendations would be grateful. I need it to be able to cut all types of tiles and sizes,easy to transport .
Regards

 

[White Room]

Why would you want to remove the guard....

 

[Andy Allen]

rubi nd200 is a good all round cutter..

 

[leslie]

for cutting out holes, i.e. plug sockets ect

 

[cam_low]

Just get the dewalt

 

[poynton phil]

for cutting out holes, i.e. plug sockets ect

Get yourself a 4 inch grinder, with a montolit squadro blade, ideal for this job, as for a wet saw, the bricollina is a superb little saw, but its made really for small tiles, you need to get a bigger one, like the ones mentioned above.

 

[Perry]

i have never used a guard with a bottom bladed cutter in all the years i have been tiling it gets in the way and stops you plunge cutting if the cutters not right send it back

 

[Andy Allen]

i have never used a guard with a bottom bladed cutter in all the years i have been tiling it gets in the way and stops you plunge cutting if the cutters not right send it back

dont you get covered in water...

 

[poynton phil]

I used my wetsaw without a guard once, got soaked thruogh.

 

[charlie1]

I dont think ive used a small wet cutter in over 2 years, I only use angle grinder with piece of straight timber as guide (if needed) If am ever wet cutting and the cut is going to be seen then i use my larger rubi rail cutter....which is now for sale btw as i recently got a dewalt!

 

[bugs183]

My kit is a Rubi ND200, for smaller stuff, a Dewalt for larger tiles and stone and a mini angle grinder with a squadro blade for sockets and general tidying up of cuts.
They've all been mentioned before as they are all decent bits of kit.

 

[Perry]

dont you get covered in water...

not if you went to the right school :8:

 

[White Room]

not if you went to the right school :8:

Yer:rockon2:

 

[leslie]

Thank you for all your opinions, I have purchased a Rubi ND200, so happy tiling.
Regards

 

[White Room]

Good cutter.....