Discuss Wet ufh system issue. in the Australia Tiling Forum area at TilersForums.com.

T

Theslippaking

Went and had a nose at a job this aft and left a bit baffled.the customer rang around three mths ago wanting 70m floor laid,but I was too busy and thought nothing of it.
He called again this week so I went and had a look.mainly wondering why no one had done it yet:-/
Its got a wet ufh system with a pumped screed,which is apparently a year old.it's had the heating active throughout the winter.i had a close look and it looks fine to me.no cracks anywhere,nice and flat.
Do i need him to shut the whole floor(3 rooms)off before fixing.and for how long?
Cant say I'm keen to get there,but needs must I spose.
 

widler

TF
Esteemed
Arms
2,334
1,328
England
Lots of screeds are pumped but it is fairly odds on that with wet UFH it will be anhydrite. However if the heating has been running it needs to be switched off for 48 to 72 hours and then a moisture test done to ensure its dry before tiling.

Not always alan, im on a job at the mo, bloke who built the house has been building them for years, this is a s/c screed with WUFH he has never heard of anhydrite, ive only ever heard of one around my way.
Also as you say, we were pumping s/c screeds ( on good jobs) in the early 90s so this could possibly just be a s/c screed
 

Ajax123

TF
Esteemed
Arms
931
1,213
Lincolnshire
Not always alan, im on a job at the mo, bloke who built the house has been building them for years, this is a s/c screed with WUFH he has never heard of anhydrite, ive only ever heard of one around my way.
Also as you say, we were pumping s/c screeds ( on good jobs) in the early 90s so this could possibly just be a s/c screed

Yes I agree. There are lots of pumped screeds about these days. I'm just going on probabilities really. I will fall back on my usual advice here that if you cannot find out what type of screed it actually is then treat it as if it were anhydrite anyway.
 
This thread hasn't been replied to for 14 days, so replying to this one may not get a response. Post a new thread instead.

Reply to Wet ufh system issue. in the Australia Tiling Forum area at TilersForums.com

There are similar tiling threads here

    • Like
Hi everyone, With a kitchen renovation, Mrs choose the white mirror quartz floor tiles from a...
Replies
4
Views
1K
Hi folks, Just looked at a conservatory tiling job. Wet UFH system, set into sand and cement...
Replies
3
Views
2K
Hi All I am after some advice please. We have a retrofit undefloor heating system ( Robbens...
Replies
8
Views
3K
Hi all I’m so glad to have stumbled upon this forum, which seems to be a treasure trove of...
Replies
5
Views
3K
Hello friends. I am looking for a bit of advice, you would be so kind. I have been a long...
Replies
2
Views
2K
Please visit our sponsor websites, they keep the forum free to use!

Advertisement

Tilers Forums on FB

...
Top