What’s the best tiling gap? 2-3-4mm etc

[Jkb]

Hi,
Second post.
How do you decide what’s the best spacing gap between tiles? I plan on setting 200 x 500 x 8.5mm wall tiles and unsure of what spacers to set between these.
Any advice appreciated

 

[Qwerty]

2mm is the norm but be mindful of going wider if they arent rectified edges as it appears to open the joint up

 

[Dumbo]

As above 2mm providing they are of decent quality .
I may prove prudent to lay a sq metre on the floor all pushed up together and make sure the joints align

 

[Wayne Brown]

As above 2mm on walls if of good quality although I tend to use 3mm more these days especially on floors it gives you room to correct any discrepancy in the tile. Kop

 

[Brian the Tile]

2mm for me

 

[WetSaw]

2mm normally but will go down to 1mm when using tiles with a rounded edge and dark biscuit ( if the tiles allow ) otherwise with a 2mm spacer it ends up looking like you've used 5mm!

 

[GoneGuy]

2mm in walls, 3mm on floors dependent on the tile as some can be a bit sizey.