Work Bench

[astute1]

looking to make/buy or source a better work bench. I have for the past 10 years just been using the handiman type folding work bench but I find that they are never really high enough and not really that great for cutting and working on with the grinder/cutters. Also not to user friendly carting from job to job. What are you guys using any good ideas.

 

[tfs]

Two folding trestles with a sheet of ply or chipboard!

 

[Andy Allen]

the floor......its cheap and theres loads of it around

 

[DHTiling]

Hop ups..

I have had them for years. since they first came out and they are the higher ones than some you get now..

 

[astute1]

Hi dave,

wot are hop-ups, your talking to a tiler in New Zealand, we probably call them something different down here.

cheers

 

[White Room]

A hop up is something to stand on when reaching hights

 

[DHTiling]

Hi dave,

wot are hop-ups, your talking to a tiler in New Zealand, we probably call them something different down here.

cheers

These.. they come in varying sizes etc and can be used for standing on and as work tables etc..

 

[doug boardley]

Two folding trestles with a sheet of ply or chipboard!

same as

 

[The D]

i use a hop up but i also use a B&D work mate and that is spot on

 

[White Room]

Looks a bit unbalanced there

 

[The D]

solid as m8 clamped in underneath it is going now where.

 

[Aston]

alloy hop up for my tx700
and a work mate with a square piece of ply clamped on top for using my ts40 and for drilling, clamping tiles etc