LTP Grout sealer and protector

[Spare Tool]

Just grouted a floor today with TM Jasmin, against my advice of it being too light a colour thats what she wanted, anyhow picked up a can of LTP grout sealer spray...is it any good, also is it as easy as it says on the tin, just spray and leaves no residue on the polished porc?
Did a test on some kitchen roll sprayed and the water wouldn't soak into it at all, just sat on it in a droplet, so definitely improves water penetration, which in turn has got to surely improve staining etc..
Am popping back tomorrow night to seal the grout so can I just spray over joints and walk away confident or should I need to hang around and polish up?
Oh and somone will no doubt mention epoxy...don't bother 😀

 

[Lithofin BOB]

Any off cuts off the job in the van , you could test spray a line on that andy,

 

[Spare Tool]

Any off cuts off the job in the van , you could test spray a line on that andy,

Ah bloody hell Bob, should have thought...test it 🙂 I have an offcut of tile but left the spray tin on the sodding job.

 

[Tile Shop]

If over applied, can leave residue thats difficult to shift. Depends on the tile as to how visible it is. E.g black polished porcelain shows everthing, even that what shouldn't be there.

 

[Spare Tool]

Cheers Paul these are the tiles if it helps...Simpolo, vitrified polished porc?

 

[Lithofin BOB]

States residues possible on polished porc, worth that test . Don't forget your mask!!

 

[Tile seller]

I used it on flat glazed white ceramics.
It did leave a residue on the tile as you'd expect so, needs buffing off.

 

[Spare Tool]

I used it on flat glazed white ceramics.
It did leave a residue on the tile as you'd expect so, needs buffing off.

Immediately?

 

[Lithofin BOB]

Tech sheet states after 5 mins,

 

[Spare Tool]

Tech sheet states after 5 mins,

Thanks Bob 😀