Hello,
I've started refurbishing my ensuite and I'm a bit overwhelmed by the number of options available for floor preparation. Have done a lot of googling and not found any threads on here which completely address the situation I have, so any advice would be really appreciated!
The floor was...
Hi,
We are currently getting our en-suite tiled and there seems to be an issue.
On one of the walls where the tiles are exposed, there is no gap at the very top but as you work your way to the bottom there is about a 10mm gap.
The tiler said that the wall surface wasn't flat but the wall is...
Please see rough sketch. My ensuite is 2x2 m with the door opening into the left into the room. I have a 900x900 quadrant shower with an electric shower. Sink on same wall. Where the toilet is, that's the exterior wall. Window above toilet. All walls and floor tiled!
I'm going to revamp it...
Hey there,
We're currently in the planning stages of our dormer loft conversion project which will form a new master bedroom and ensuite.
Ensuite is looking to be about 1.8m wide by 2.6m long, with the shower running width ways on the external wall.
Currently, I'm planning on using an...
The floor that’s down is 18mm OSB board, the floor in the rest of house is 22mm chipboard. does anyone know what the best method is to tile the floor, preferably not taking OSB up.
I’ve just finished pitting hardie backer in our very small en-suite, having set the sink and toilet in to see how it looks it’s dreadfully smaller.
Your head is in the sink when sitting on the toilet, it’s that tight.
And it’s going to be worse once tiling is done.
Should I think about tiling...
Hello,
I am installing an ensuite which will have all the walls and floor tiled with ceramic tiles but am not sure whether, after the first-fit plumbing and electrics are in place, the complete room should be tiled and then the toilet, shower and vanity units fitted or whether some or all of the...
Can anyone identify this border tile please?
We need a few to finish tiling the en-suite shower, they are 25cm x 8cm in size.
Thanks
David
Ensuite Border by David Pearson posted Oct 16, 2018 at 8:35 PM
Will soon be getting our en-suite tiled. It’s about the smallest bathroom I’ve ever seen.
It’s comtained four studded walls and since I wanted to add some electrical wiring to two rooms that are next to it ripping down the plasterboard seemed the right thing to do. Means I can install hardie...
Hello, i am looking for somebody who can not only tile the room but can do the whole installation including:
fitting the waste outflow (concrete floor)
boarding the 2x stud walls
tanking the shower area
tiling the whole room (floor and walls)
fit shower enclosure
Would like survey and to discuss
First job I ever got off the forum was about 7 or 8 years ago. Was a main bathroom that was leaking and failing and a WC. Spin on 3 years and I had very little work on and I was struggling financially. In a stroke of good fortune the clients contacted me again for 2 more ensuites, a WC and a...