I’m about to remove and replace in same place my bathroom and fittings. I am planning on tiling walls and floor with 600x600 tiles. Please could someone help
Me on planning this. Do I baton above bath then all way round? Do I tile window wall first. ? Also some of the plaster has come off...
I've over ordered on a recent levelling job and have a full pallet of 48 bags lf UT Prolevel Ultimate left over. Belt n braces top make sure we didn't run out!
Date of manufacture is 27.07.2023
As the pallet is still fully shrink wrap sealed from the factory I can organise free pallet...
60 X 40 CM PORCELAIN TILES FLOOR TO CEILING LAID IN LANDSCAPE COLUMNS . THE CORNER WALL NEXT TO DOOR OF BATHROOM AND FORWARD FROM SHOWER ENCLOSURE IS UNEVEN . EXISTING TILES WERE STRIPPED OUT & NEW BOARDING & PLASTER SKIM. THIS WAS DONE TO ENSURE STRAIGHT/TRUE/FLAT WALLS . OTHER THAN STRIPPING...
I am about to tile a splashback having put the job off for a few months (much to my wife's annoyance)
As you walk into the kitchen, the first worktop starts, with the basic shape being an upside-down U shape with the wall directly in front of the door having the window.
I am using 200 x 100...
Hey guys, I hope you're all well. Any advice on getting a neat trim on this one? The trim will want to run floor to ceiling along the blue dots. The wall with the purple dots will be tiled floor to ceiling. The wall with the red dot will be half wall. If I use trim sitting out over the half...
Professional and happy tiler wanted to join our busy team.
We specialise in supply and fit for domestic projects from our tile showroom in Reigate, Surrey, and work within the surrounding areas.
You need to be keen, have experience with natural stone/mosaics/wetroom installs and enjoy what...
Hi all
In a kind of 'Payment' for all the advice i have got from here i have decided to do a build thread for my wet room, it may help someone in the future it may not but here it goes!
Room size is 1.8M x 2.2M, at the end of the extension i finished building a last year. I work full time so...
Just about to start tiling the final wall in my kitchen I've tiled all the way around up to the units and now I'm just left with the final wall which doesn't have units.
I'm setting out and to keep the level of the tiles from under the units on to the wall without units I would have to have a...
Take a look at my excellent drawing...:rolleyes:
I need to tile one full wall, and the wall at 90 degree just half tiled.
Need to trim the full wall to the ceiling, and trim the half wall, I hate seeing the double trim next to each other, so thought I might mitre the corner and trim above...
Tiler needed to rectify the issues left by the last joker of a tradesperson. Plus en-suite from scratch
Bathroom
Flooring (600 x 600mm tiles) – You will see they have cut the floor tiles too short around the bath side edge, they seriously miscalculated this although I’m not convinced they even...
How do I know what grade my Porcelain tiles are I have been read on here about different grades.
I have some Porcelain tiles but do not know what the grade is.
We have an exciting opportunity for an experienced tiler, where we can offer full time and permanent work.
This position may suit a tiler looking to move away from commercial or site work, or someone seeking the security of a full time position.
Work will involve travelling between sites...
JustTiling
Thread
customer
find a tiler
full
tiler
tilers directory
time
So after spending the day with Derek @Sigma UK
Using the full Kera Lift system, I decided sooner or later I'd obtain one.
Couple weeks ago someone I knew wanted to sell his, and not usually being the type to buy new tools, I thought I'd take a punt this time around.
Coming at under 20Kgs, the...
Just about to line my en-suite out with Marmox boards onto the existing (new build) hardwall finish. Primed with Mapei G first and will use spankers/dowels but what's the consensus on dot n dab vs full bed of addy?
Will end up with 300 x 600 9mm porcs on top, but the spankers are there to...
Andysblacksoul
Thread
backerboard
canada
dab
dot and dab
full
marmox
marmox backerboard
tile backerboard
wall
wedi
EXPERIENCED TILER REQUIRED TO JOIN OUR LARGE TEAM OF TILERS
EXPANSION TO READING - RG2 SITE
2 YEAR EXPANSION TO EXISTING SITE - START DATE: IMMEDIATE
An exciting and excellent opportunity for a loyal and committed independent tiler to advance in the industry with this dynamic and highly...
m3fitter
Thread
find a tiler
full
required
tiler
tilers directory
time
Looking for a full time tiler to join our team.
Ideally you would need your own transport and tools. (But we could work around this if you have a driving licence.)
Experienced in all aspects of tiling.
Very good eye for detail.
Work will be based in Staffordshire, Shropshire and West...
Dante Tiling Ltd
Thread
find a tiler
full
job
jobs
needed
tiler
tilers directory
tiling job
tiling jobs
tiling work
time
work
hi,
I am seeking tiling training around the Surrey area. I have completed a level 2 course in 2012 and have been working for agencies since. I am want further training in domestic tiling because I feel I am not yet up to a high standard of tiling. The work I do is not constant with agencies and...
Hi
I'm currently having my ensuite bathroom redone.
Tilers were in a day or two ago - I am unhappy with the work done. The problems I see are:
It looks untidy
The adhesive is visible behind the tiles
The adhesive appears to be too thick
The edging pieces not meet up at corners
The edges of...
Pleasehelp
Thread
advice
attach
canada
full
job
jobs
this
tiling
tiling job
tiling jobs
tiling work
work