grinders

Recent contents Top users
  1. P

    Water-fed angle grinders

    Hi, I've been thinking about corded a water-fed angle grinder and wondered if anyone could recommend one? Also are these dust-free enough for use indoors? many thanks in advance.
  2. Balloo

    Looking for advice on cordless grinders

    Has anyone been using a cordless angle grinder id like to get as much info before purchasing one. What's the best make and are they really worth it
  3. Bopster

    Cordless Flexvolt grinders

    i currently have a mains voltage Makita grinder I use just for drilling and also a cordless 18v dewalt grinder I use for cutting. My question is does anyone have the Flexvolt grinder as I’m looking at upgrading? How good is the run time mainly, obviously more power would be nice? I’m invested...
  5. acaciaguy

    Cutting guides / wheels for grinders

    what do you guys use for ensuring a straight cut on long tiles with a grinder ? monolit do a guide wheel. What’s the best practice?
  6. B

    Alternative to cutting with grinders outside in the elements

    Tiled kitchen splashbacks with metro tiles today, half bond and didn’t once go outside in the pouring rain or even used a manual cutter. Just set up my little Briccolina wet saw and did every straight and L shape cut with no mess, no water everywhere and no dust. I had forgotten how good and...
    • Blunt Tool
    • Thread
    • cutting grinders outside
    • Replies: 49
    • Forum: Tiling Tools
  7. F

    Hand held floor grinding set up

    does anybody own or use a hand held floor grinding set up with dust extraction?
    • Flintstone
    • Thread
    • floor floor tiling grinders grinding set set up
    • Replies: 56
    • Forum: Tiling Tools
  9. M

    proffesional concrete grinders

    Finding myself in need of one of theese Any reccomendations? Eibenstock makes good but kinda pricey..
    • mr.tile
    • Thread
    • concrete grinder grinders
    • Replies: 7
    • Forum: Tiling Tools
  10. F

    Cordless angle grinders

    Who uses them exclusively for cutting? Is it worth the investment of £450 for a flex volt grinder??
    • Flintstone
    • Thread
    • angle cordless dewalt disc grinder grinders
    • Replies: 27
    • Forum: Tiling Tools
  11. roadking

    makita cordless grinder & 6AH batteries

    Hi guys, just bought a couple of 6AH batteries for my cordless grinder..... wow its a big improvement on 3AH and 4AH......expensive at £100.00 each but well worth it.....
    • roadking
    • Thread
    • cordless grinder grinders makita tools
    • Replies: 4
    • Forum: Tiling Tools
  13. T

    Cordless grinders

    Hi lads, I'm looking at getting a cordless grinder & can't make my mind up as to which one, makita, dealt or Bosch any advice would be much appreciated .
  14. W

    Dust Extraction for Grinders

    Found this on Amazon, might be of interest if your grinding floors..... http://www.amazon.co.uk/Bosch-2605510224-Extraction-Guard-Sanding/dp/B000R5K4LS/ref=pd_rhf_sc_p_img_2
  15. J

    Angle Grinders

    I need a lightweight cordless angle grinder 115mm to fit the new Rubi tile disc does anyone have any recomendations? I have seen the Makita BGA452Z but @ £340 it is more than I want to pay.
  17. G

    Rubi grinders

    Clicked the link at the top of the page for the rubi website and think ill get a new 5" and 9" grinder, anyone use the rubi oneS only used bosch and makita before, also is there anywere in Glasgow i can just walk in and get these ?
    • GC-Terrazzo
    • Thread
    • grinders rubi rubi tile cutter rubi tools tile cutter usa
    • Replies: 2
    • Forum: British & UK Tiling Forum
  18. D

    Anti-Vibration grinders

    Am in the market for a new grinder and since I suffer from a bit of RSI I think maybe something designed around anti-vibration. I generally use a 4 1/2" grinder, in the past using bosch but always returning to makita. I was told to check out hitachi by a dealer but there website seems to have...
  19. S

    flex polishers/stone grinders

    Hi. im looking at buying a polisher/ and or Grinder for profiling and honing Polishing Stone. What Is the Best thing to Go for as i have been asked a few times to Bullnose doorsteps and half bullnose porcies instead of trim.it is something id like to be doing. Is it best to have 2 seperate...
  21. U

    angle grinders

    I am just googling angle grinders and am confused as to the difference between them. I'd like one to mainly smooth off edges of my glass mosaics, and I have had a commission of a mosaic on steel... long story, and need to smooth that edge, too, together with the glass, just to make it safer, it...
  22. M

    grinders and wheels

    hi guys whats the best grinder and whells out there that some of you use.
  23. R

    Concrete Grinders

    Does any one have a concrete grinder, or have used one like this one by Makita? Makita USA - Tool Details - PC5000C Bosch makes one that is similar in size and price. (about $400 US) Hilti has one that is about 4+X the price (aobut $1800 US), but the Hilti rep won't commit to...
  25. U

    Angle Grinders for tile cutting

    Hi, I am student from Hungary and i am writing my essay on angle grinders. I was trying to locate some tiler forums but this was the only one i found. I was wondering if any of you could help me out on this topic.. What i am looking for is typically: what grinders are the best for cutting...
  26. T

    Angle Grinders

    Hi All, I have seen some posts on here about Angle Grinders and was wondering what you used them for when tiling? I have my trusty rubi cutter and a plasplugs wet saw, so I dont know why I would need a angle grinder. Am i missing something? Thanks
Which is the Number 1 Best Tile Adhesive?
TilersForums.com; Made BY Tilers FOR Tilers
UK Tiling Forum by Tilers Forums

Advertisement

Top