machine

  1. A

    Machine at end of life?

    Hi, l'm a new member Uk. My Ferm 550 (dont laugh) wet cutter blade seems angled (to the right ) in the bed, so cutting with the guide means the waste part of tile gets 'squeezed 'against the guide and blade so becomes impossible to push through so l finish up having to turn workpeice round or do...
  2. etaf

    Wet Cutter Machine Advice

    I searched but did not find an answer. I been advised to get a wet tile cutter, I plan to cut 10x30cm ceramic tiles , maybe about 40 tiles will need cutting, to go up against a vanity unit and the door frame , and 1 set across the back of the room, so a mitre would be good for those tiles I...
  3. B

    How straight should a tile snapping machine cut?

    I just unboxed my first proper tile cutter and tried a few cuts on some spare tiles. (BIG CLINKER) It works ok but the cuts aren't exactly straight. I would say they wave/vary up to 1mm to 2mm on a long cut (30cm). Most often they are curving one way toward the middle of the cut and then...
  4. Chris Gibbs

    floor adhesive removal machine? anyone had similar problems? its 80m so dont want to be on my knees :)

  5. U

    Sigma Bullnose Machine

    As anyone got or tried the sigma bullnose machine please ,looks good ,
  6. C

    Cutting Machine to buy tomorrow

    Hello everyone. I need to buy a new sigma or rubi machine to cut tiles over 60 cm. The problem is I need it tomorrow by the evening so I plan to go and buy from one shop because on amazon it will be delivered by Tuesday. I am asking for help maybe someone know from where I can buy something in...
  7. N

    Sigma Sigma Simple Bevel Machine & Bench Fixing Kit

    Hi, Have the following for sale, purchased new from Pro Tiler Tools. 1 x Sigma Simple Bevel Machine (NEW 2017 MODEL) 36A4 1 x Sigma Simple Bevel Machine Bench Fixing Kit (New 2017 Model) 36C4 I purchased this hoping I could work a way out to do smaller tiles but unfortunately it hasn't...
  8. J

    Any Idea Where To Find A Sanding Machine For Gypsum In London

    Hi again, So following my misfortune in my Gypsum adventures (by the way many thanks for all the comments): Tiles Coming Off Screed Re-tiling Advice I have now to sand my lovely floor (the main contractor having jumpped off the boat with his packs of plaster leaving me with the Tiler). The...
  9. Dan

    Raimondi Berta Grout Washing Machine

    View: https://www.youtube.com/watch?v=PQ-MXRJTp6s Raimondi BERTA Grout Washing Machine Electrosponge for cleaning grout (cement based or epoxy resin) from floors: Terracotta, porcelain, double-fired and single-fired tiles, marble, clinker, porphyry, natural stone, quarry tile, treaded tile...
  10. S

    Bulldog Bullnoses Machine

    hi ive got this bulldog bull nosing machine for sale it been used bullnosing skirting staircases I am looking for £800 but open to offers (collect only) this is the machine im selling (only a like ness mine is used)
  11. C

    Floor tile remover machine experience of, or opinions please

    Hi, I have removed the floor tiles from my kitchen floor but need to get the adhesive type cement up. Ive used a sds drill with chisel attachment to get the tiles up but the cement is not so easy. I was thinking of hiring a machine from HSS Hire advertised as ''floor tile removal kit and just...
  12. D

    plasterboard /tile backerboard cutting machine .....

    https://www.youtube.com/watch?v=eump3ODx9iU&list=PLAasPyVdktJMnOlSA_GwB75e hJrZ11LJ5
  13. K

    Tile adhesive drying times...for washing machine!

    Hi all, Have just finished tiling three rooms in house. Adhesive and tiles were set 48hrs ago and grout was yesterday. now my conundrum is that I'm keen to get the washing machine back in as otherwise ill be resorting to renovating the rest of the house in the nude....! How long should I...
  14. S

    amazing machine

    i have been using the montolith for the past few months and cannot fault this machine just never lets me down ;the cuts are precise and clean ;and the titanium wheel cuts through anything unlike the rubi which you will change every month ;i started out on sigma then 5 years with rubi but this...
  15. S

    Polishing machine

    I've been looking to purchase a polishing machine for a while now but don't know which one. Looked at a Makita wet stone polisher or a Flex. What machine do you guys use??
  16. C

    Wet cutting machine

    Should hopefully have a big job coming up soon, 30mm thick marble and varying sizes, but up to 1200mm long, was wondering what machines are on the markets now, ive got a big 6 foot one already, but its a bit of a relic and a four man lift, so maybe one of you have a few recommendations i could...
  17. E

    NEW 20L adhesive spreading machine

    ''hope you don't mind me contacting you about our Brand New 20 litre Automatic Floor adhesive spreading machine. It's ideal for using with adhesives for Carpets , Vinyl, Wood and Ceramic Tiles. We've teamed up with some of the UK's top manufactureres of adhesive which will be announcing...
  18. R

    Raimondi Supertitina cleaning and grouting machine

    Raimondi Supertitina cleaning and grouting machine: - dual speed; - 110V; - 600W; There are spare cleaning pads, grouting float and brush as seen on second picture. Price:£250.00
  19. S

    first trial of the vibration machine

    here is some video of the first trial of Ray's Tile iron vibration machine which aids solid bed fixing ,I didnt get the hang of it at first and was pressing far too lightly as I was fightened it would damage the tiles and it took me about 10 tiles to get the hang of using it ,it definitely...
  20. Dan

    Just booted up my old machine

    Just booted up my old machine after about 2 years of it not being used. Used to be a really good computer back in its day. It's running Windows XP x64 and did have 4GB ram back in the day when only 2 would run on 32bit PC's. Turns our 2GB of ram aint working, for some reason it says I now...

Advertisement

Top