mixer

  1. B

    Shower mixer knob won’t reattach

    I bought this shower mixer unit from Victoria Plumb some years ago, & one of the handles has come off & I cannot manage to re-fit it to the mixer unit arm (see photos). It was in place for a long time but somehow came off recently but no matter how much pressure I apply to try to push it back...
  2. P

    Change shower mixer. Invented hot water cylinder

    I need to change my shower mixer and I have a unvented hot water cylinder. Is it sufficient to turn off the mains? Do I need to drain the cylinder? Thanks Continue reading...
  3. L

    Mains supply to mixer tap is pushing cold water to hot water pipe

    I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied from cold water tanks in the loft. It is a vented system. However, in a basement flat and a ground floor flat cold water supply to bathrooms is through...
  4. L

    Mains supply to mixer tap is pushing cold water to hot water pipe

    I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied from cold water tanks in the loft. It is a vented system. However, in a basement flat and a ground floor flat cold water supply to bathrooms is through...
  5. E

    Mixer Tap Cartridge change advise. Discussion Thread

    Mixer Tap Cartridge change advise. Discussion Thread Hi Our kitchen mixer tap is leaking around the bottom. Unsure where the leak is coming from but suspect/hope a new cartridge will fix it. I am not a confident DIY guy, our mains pressure is really high and so plumbing makes me nervous 😂...
  6. B

    Mixer tap ring sheared during seal replacement - how remove Discussion Thread

    Mixer tap ring sheared during seal replacement - how remove Discussion Thread In serious trouble here, was going to replace seals around base of mixer tap spout as it was stiff to rotate. Allen removed ok, but spout very difficult to remove, but working it back and forth got it out. But a part...
  7. S

    Low pressure mixer spray tap recommendations ? Discussion Thread

    Low pressure mixer spray tap recommendations ? Discussion Thread I'll be installing a new kitchen, DIY, and the Mrs wants a mixer tap with a switchable spray/regular flow. No pullout with hose but more like one with a spiral round the outer hose that lifts out of a mount and you can move it...
  8. H

    Showerforce 2000 - anybody replaced the mixer seals? Discussion Thread

    Showerforce 2000 - anybody replaced the mixer seals? Discussion Thread Hi This relates to an earlier thread I have the above old shower which leaks ; you can no longer get the Showerforce Service kit to replace the seals so I wonder if anyone has done this job and whether suitable seals can be...
  9. B

    Shower mixer knob won’t reattach Discussion Thread

    Shower mixer knob won’t reattach Discussion Thread I bought this shower mixer unit from Victoria Plumb some years ago, & one of the handles has come off & I cannot manage to re-fit it to the mixer unit arm (see photos). It was in place for a long time but somehow came off recently but no...
  10. A

    New Erbauer paddle mixer.

    I've just got the new Ebauer paddle mixer, it's really good especially for £70. I was thinking about buying a cordless mixer, I'm still waiting Bosch! 1600w a big step up in power from my Sparky 1060w. More ergonomic handle design and higher on the mixer so you don't have to bend down as much...
  11. S

    Mixer Paddles.

    Hi guys Just a simple question.... Whick tricks / methods do you use to keep the mixer paddle clean ? I personally spin mine in a bucket of water but still find the adhesive building up after a while. Be really interested to hear how you guys manage to keep it clean... Assuming that you do...
  12. G

    Please help, planning concealed mixer location

    Hi, great forum, so far has proved very useful but I couldn't find an answer to my specific question. I'm planning the install of a landscape orientation shower and bath mixer. This is to go above a double ended bath and will be centrered above the bath overflow. My issue is the height above...
  13. A

    Setting Out how should I centre in shower with offset mixer

    Kind tilers out there: the back wall of my glass shower cubicle is 990mm but the plumber centred the mixer lever for a 1000mm shower. I am going to tile with a 600 x 300mm tile (in landscape stack), I don't know how to lay it out. Is it better to: 1) have a grout line running plumb from the...
  14. ACCOLADE

    Replacement batteries on Rubi E-10 cordless mixer.

    Looking for a replacement battery for the RIBI. E10 cordless mixer. Iam not paying £100 for 5ah one. So looked online. It looks like same as matabo. Anyone found alternative make that fits this paddle mixer please? Source URL: RUBI E-10 BATTERY -...
  15. R

    Replacing tiles around shower mixer

    Hi All, Very much a novice at DIY and tiling but i have just moved into a house where there are some tiling issues in the bathroom i would like to have a go at fixing. I just want to check that is a basic level job before i make the problem worse. Hopefully the attached pictures explain the...
  16. Wishiwasatoptiler

    Flex cordless paddle mixer

    Hi Has any folk got this mixer, whats it like for mixing across the day and can mix plasters as well as tile addy. Cheers
  17. W

    Best reasonably priced mixer?

    Just bought a Rubimix 9 240v but sent it back as it actually struggled and laboured mixing standard tile adhesive and was so so loud. Anything else at around £90 to £150 that'll be better? Im not using it daily. Once a week at most. But would like something that will last.
  18. A

    Small Gap Behind Mixer Controls

    Hello, I’m looking for some advice please. Behind the mixer control of my bath there looks to be a small gap between the back of the mixer control and the tile. It looks like it’s as a result of the mixer being installed over two tiles. The shower head is right above the mixer so I’m...
  19. I

    Cordless Mixer for Mixing Adhesive and Grout

    I thought that sometimes I just have to attack the current wire for the mixer. I wanted to know if anyone tried these or what you think. the most interesting seems to me collomix (metabo), in the evening, remove the whisk quickly and bring the mixer home.
  20. F

    Quick help please - refit shower mixer after tiling

    Hi all, Not strictly a tiling question, but I'm finishing a job today and need to refit this mixer. I've attached a photo of what it looked like before. There was just a grub screw underneath then the mixer literally just pulled off. Is it just a case of pushing it back on? It looks like a...

Advertisement

Back
Top

Click Here to Register for Free / Remove Ad