niche

This was such a fun yet stressful project. I had to reglaze most of the black trim tile due to the fact that they weren't finished on all sides.

I am building a niche in a 26x15 opening on a 60x32 shower I will be tiling. I am using GoBoard as backer. Does anyone have a link on fabricating a niche out of GoBoard or Schluter board? Also, question on tile costs: Since I visited various tile shops including the Tile Shop, Virginia Tile...

What would you guys recommend to finish the internal corners on this niche? Grout or sealant? The niche is inside of a shower cubicle Already grouted the corner of the cubicle then thought maybe it should have been sealant instead. That can be corrected if need be but wanted to double before...

Im in the process of building out this wall that will form one wall of a shower cubicle once tiled. Id like to build a wall niche into this wall as a feature but im stuck on the best way to set everything out so the niche is centred in the shower tray. The shower tray is 700mm deep and id be...

Hi, I’ve had a niche built in my shower (photo on left) I’d like a shelf inserted in the middle (similar to the top right photo) and I’m wondering the best way to do this. My plan is for the sides of the niche to be tiled in the same ceramic tiles as the shower and the back of the niche to be...

Hi, I am wondering if anyone is able to apply mastic neatly to bumpy tiles i.e. this one. Eminence Johnson Tiles. Eminence Tile Satin White Being the genuis i am, decided to go for these tiles. Plumber been wonderful, he is just worried he won't be able to make sillicone look neat. Work...

Hello again. Got the kit laid out and ready to lay the first tiles after a challenging time with the shower tray. Just a couple of answers would help me out a great deal. 1) The centre wall for the shower is 1400mm, tiles 200x100. Accounting for 2mm for expansion at either end and 2mm grout...

this is my first property i am renovating. i have made the niche so far from stud and the back i have used 12mm plywood and sealed using ob1 sealant/adhesive. I have already purchased some aquapanels to use. would it be best screw the aquapanel in the niche and use the knauf joint adhesive, then...

Hi All , about to start tiling the walls in my shower on jackoboard and tanked joints, I have two shower niches on the same wall to put tile trim around, my tiles are 9mm thickness so I was planning on using 10mm either straight edge or round edge alloy tile trim, could you guys confirm if 10mm...

What would you do? Customer wants a niche between bath and window Niche (350x1600x180mm) He also wants lights in the niche (top) Max height from top of bath to finished tiled window sil level is 460mm Has anybody put a niche level with the bath? Is it a good idea to do that? Thanks!

am I being unreasonable by not wanting to leave a glass edge in a shower niche I wouldn’t mind but the glass mosaics where quite rough ( fired earth ) she didn’t want any trims also didn’t want me to tank it out said it was a waste of money .?

I am sick of tiling these dam things we need an alternative idea thats easier to do,. I have had up to four niche's in one shower sometimes with 120 x 60 going on. Just want to have a moan

I installed a premade shower niche that is tile ready in my wall. The way the tile fall there will be a real little sliver of tile along the edge. So the niche is too big (sorry I wrote to small in the title). The directions say to tile right to it. So can I make the box smaller by apply some...

Hi. Im going to lay a stone resin showertray . There's no instructions but was going to use sand and cement mix, then I saw tech 7 super adhesive/sealent. Has anyone used this . The company said it would do the job. Also im thinking of doing a shower niche, its 3 inch framing that's in wall...

Hi guys, looking at a bathroom design im doing and the customer has asked if I can install a niche behind the bath. Its an external wall. Can this be done, obviously it can be cut out and a lintle installed. But what about sealing the cavity, what materials to be used etc. Cheers, luke.

Hi, Just getting our bathroom redone and it's all stud walls. Where shower is, stud wall built to go over soil pipe so I wanted a shower niche but the fitter isn't recommending it. He is worried that if the wood warps, could cause the grout to crack and water to run down behind stud wall where...

hope this isn't a daft question but how would you go about tiling a niche from scratch? Would you have toi build some kind of frame or would you cut into the wall? It's not something I have ever done so just curious. Thanks :thumbsup:

I'm about to start tiling a couple of shower niches in my bathroom and i'm wondering about how to install the trim on the external edges. The concern I have is if they're going to be waterproof? I can't see how it's sealed where the tile meats the strip if I just use the adhesive to bed the...

Hello! I'd like to pick your brains regarding a shower niche I'm building (my first one). First here's a pic - 1. How to finish the edges? Trim? Or overlap? and should the inners overlap the outers? Oh, and if u say to overlap, how do you seal the edges? 2. You can see how I've build...

Hi, can anyone tell me where I can buy a preformed shower niche? The only ones seem to be on USA-based sites and they don't ship to the UK. Prefer a Dupont Corian or similar material.