Good Evening Folks.
I'm going to post a few pictures & would like to hear some feedback from tried & true industry pros. I have tried to point out the issues that are staring me directly in the face, but the other two parties involved are denying they exist, can't reconize them & are...
Hello Dan and Lou. Appreciate you're both busy. I've been searching the forum for a thread posted a couple of years ago, don't
recall his name, he asked for and got great advice as the project progressed. Seem to remember it was bathroom based. It went
on for some pages . It was great for...
Hi guys im looking for ideas for customer for a wet room floor she's useing 20x20 pattern type tile with a linier shower gully that's in one side of the room .
Thanks
Hi lads and ladies,
I could do with a few tilers van pictures. I know we've had a few threads on this, but I wanted to get your actual permission, and perhaps an updated pic.
I'm making a blog post about finding reputable tilers and could do with some pictures of the side of your van if it's...
So, what's up chaps why does nobody post any photos of there jobs, finished or work in progress ? We all love to see photos. There once was a show us your work thread but that dried up some time ago.
Flintstone
Thread
canada
diy
floor
floor tiling
job
jobs
pictures
professional
thread
tilers
tiling
tiling jobs
tiling work
wall
work
your
So this is my first time using SLC, it's Mapei ULTRAPLAN 3240. Once I was coming to the end of the mix I notice a sludge at the bottom, I assume because I've mixed too fast *Facepalm. I mixed half a 25kg bag. Any advice would be greatly appreciated. I'm worried the mixed might be too wet now...
Hi guys
Would appreciate any opinions or advice on the below 3 pictures please:
Tiles 100x200 flat metro with 2mm spacers
Red Lines are 90 Degree internal corners, white bit is the window
As you walk into the room the middle wall is directly infront with the window to the left and the full...
So over last few weeks I along with @Mark Frost have been on a project that @jonnyc had invited me on to.
A new build in leafy Surrey, consisting of two extraordinarily large ensuites, his and hers, a downstairs cloak and a pool room bathroom to be done in a few weeks time.
All in Flaviker 2.4...
Old Mod
Thread
been
canada
diy
flaviker
pictures
thin tile
tilers
what
Hi
I'm desperate to find some matching floor tiles, otherwise I might have to rip up the old tiles and start again.
I kept 3 just in case some broke, but the wife wants to remove some units, which I never thought would happen, so I need more that the 3 spares
I think the tiles were purchased...
British Ceramic Tile (BCT) ceramic tiles with a thick biscuit and thin glaze are cracking on wooden floors.
Fixed correctly. Using a tile backer board with correct screws and tape.
The tiles don't appear fit for floors. Some tilers we know have said they refuse to fit them on floors.
Here is...
just finished a job where the customer didn't want trims. The tiles were awful to use. Unbelievably hard and over fired. When back cutting you would get nearly all the way across the tile and a fragment would ping off the mitre ! At the opposite end!
Every blade I have for the dewalt chipped...
Okay, so a mountain bike accident has left me with to much time on my hands and so I thought I would post on the importance of planning and preparation. Hopefully this may be of use to tilers with limited experience.
This job was done several years ago and I will go through the main points as...