wbp

  1. P

    What side of WBP ply do I tile onto please?

    Hi folks, What side of WBP ply should I tile onto? Smooth side or rough side? Does the side I'm not tiling onto need a primer? Thanks all Mart
  2. C

    18mm WBP ply prior to tiling

    I’ve bought 18mm WBP ply for the bathroom to fix directly to the joists and got noggins every 400mm. Is this base ok to tile onto with flexible adhesive and grout? It’s having electric UFH too. The reason I went for 18mm is because it’s 18mm floorboards running to it at the door threshold. Thanks
  3. T

    wbp plywood

    I'm tiling onto wbp ply with cement based adhesive, do I need to prime it first? and if yes could I get away with an sbr primer or should I be using a grit primer?
  4. T

    tiling on to 18mm WBP

    Hi everyone I have to tile onto a 18mm WBP wall. No choice. Its the way the original shower cubicle was designed. There isnt the space to line with an aqua board over the top of the ply. Please... Can someone tell me what to use as a primer in this instance. Thanks Tom
  5. J

    SLC on WBP 18mm subtrate

    Got quite a lot of levelling to do on a large floor up to 6mm thick on a floor to be laid on 18mm WBP. Just wanted to see what you guys would recommend SLC wise as do not want to trowel up with adhesive as it will take forever as the floor is all over the place.
  6. K

    Most basic question: Where can I buy WBP ply online?

    Hi all, Sorry for the really dumb question. Can you guys please tell me the best place online to buy 18mm WBP ply, wickes only has exterior that has to be treated and I would prefer something already treated, this is for a bathroom floor...
  7. G

    Shower Tray onto Hardie250 or Ply (WBP)

    Hi guys very quick and probably simple question, can the shower tray be cemented onto a HB250 or does it have to be straight to ply. Doesn't make much difference for me either way, just that I have enough HB to to allow it. On that note how does the cement effect the ply - would it...
  8. A

    WBP Ply Sealing

    Hi Guys I'm currently doing my bathroom and need to purchase some WBP ply for the floor. I've read I need to seal the underside and sides, is this with PVA. I have some BAL bonding agent I used in my cloakroom for the walls should I use this? Also what is Tanking and which product do you...
  9. F

    Slate on WBP ply

    Hello I'm about to lay a slate floor on 18m WPB plywood, I will be using the usual flexible adhesive & grout' but have been advised that this is sometimes not enough & that I should prime the surface before tiling' or risk the slate lifting. Does anyone have any advice on which primer I should...
  10. J

    more questions about wbp plywood and backer boards...

    hy all Im nearly there with my info gathering. Do i have to buy the screws which are sold by topps tiles for the hardie boards? or is it ok to buy some stainless steel screws from elsewhere? Are the turbogold screws from screwfix stainless steel as it does not say on the website? will these...
  11. J

    WBP 18mm onto floor boards??

    Hey up Just looked at a bathroom and the women has got your normal old floorboards down, not chipboard,.. Do these need to be removed to see if there is enough noggins underneath or can I just lay the 18mm straight on top of these? or is it best that there removed altogether...? Does it...
  12. P

    3/4" WBP and Backer Board or 1" WBP?!

    Hello again all, Apologies for the recent inactivity on my profile, maxed out on DIY and a new job to boot! I am in the process of doing up our kitchen/diner and currently have a split level floor. The plan is to put down a sub frame and board it prior to tiling. I am fortunate to be working...
  13. D

    WBP Ply - Tongue & Groove

    Please can someone help me? I need some Tongue and Groove WBP Ply 18/20/22mm? I live in Harrow Middlesex. Does anyone know where I might find some? Distressed!
  14. D

    Have coated WBP ply with PVA - what to do?

    Hi all. As name implies Dad is helping Son with renovating his flat. I built a new wall in the bathroom from WBP ply. Plumber (yes I know, why listen to him) suggested coating the ply with 3-1 PVA. I then used Mapei D1 adhesive. Some tiles are coming loose - fortunately have not done too many...
  15. R

    removing cement based adhesive from wbp floor

    :oops:Hi, am new here. Renovating bathroom to shower room, walls and ceiling all good, but after placing a new wbp floor and starting to tile with ceramic floor, made a big mistake. Have removed tiles, but have lumps of the flex cement based adhesive, which is now dry. Any tips of removing...
  16. A

    Laying down 25mm WBP plywood ready for tiling

    Hi, I am replacing my bathroom floor with 25mm wbp plywood. I will be using 3 sheets of plywood and was wondering how best to 'butt' them together. I have seen on various forums that I need to leave about a 2mm gap between the sheets. Do I need to fill in the gap with a flexible adhesive and...
  17. A

    Screws needed to screw 25mm wbp plywood into joists

    Hi, I am removing floorboards in my bathroom and replacing them with 25mm wbp plywood which i will be tiling on. I know I need to screw the plywood down every 150mm with countersunk screws. What screws would you advise I use? As I will be screwing into the joists I am not sure what length screws...
  18. A

    Grout and Adhesive for tiling onto 25mm WBP Plywood floor in bathroom

    Hi, I am going to be tiling a bathroom floor. I will be replaceing the current floorboards with 25mm WBP plywood. I have had different advice on what adhesive and grout to use. I have read that BAL Superflex Grout and BAL Single Part Fastflex adhesive are very good however very expansive. I have...
  19. J

    Showerstone / Plasterboard / WBP Ply / Plastered Wall Tanking

    Hi, I have a wetroom 1m x 5m. There is a 1m x 1m marmox showerstone tray fixed directly to joists at one end and the rest of the room is floored in 18mm WBP ply. There is one plastered block wall, the other walls are water resistant plasterboard with one wall of the shower area in 12mm WBP...
  20. J

    Marmox Showerstone Tray 4mm higher than WBP ply

    Hi, Just wondering how i should raise the plywood level so it is flush with the edge of the showertray? Should i use 4mm ply and screw it down? Should i glue the ply down, if so what glue should i use? Should i use some kind of poured / self levelling compound? Thanks, James.

Advertisement

Top