2 part flexi adhesive

[Turkish]

Hi all,

Can someone please explain to me what 2 part flexi adhesive is? I`ve heard of and seen single part flexi but not this 2 part. What`s the difference?

Cheers

Turkish

 

[Perry]

usually 1 part rubber crumb 1 part latex liquid highly flexible as in bal fastflex
broken link removed

 

[grumpygrouter]

Thats the end of that thread then!

Grumpy

 

[Perry]

Grumpy its the way i tell them :lol:

 

[DHTiling]

BAL make two types of this 2 part adhesive... one for walls and one for floors...

BAL Flex Powder & Liquid

A two part, water-resistant and frost-resistant wall tile adhesive, suitable for use in interior and exterior locations. Suitable for fixing ceramic wall tiles and mosaics and dark natural stone. Suitable for use on concrete/brick/block walling, cement:sand rendering, plaster, plasterboard, plywood/chipboard, tile backer boards, glazed tiles/bricks, painted walls, glass reinforced polyester (GRP) backgrounds, steel and galvanised steel. Conforms to BS EN 12004, Type C, Class 1T.

BAL Fastflex Powder & Liquid

A two part, rapid-setting, sulphate-resistant, water-resistant and frost-resistant floor tile adhesive and isolating, anti-fracture underlay, suitable for use in interior and exterior locations. Suitable for fixing ceramic floor and porcelain tiles and mosaics (including fully vitrified), dark natural stone and slate. Suitable for use on tile backer boards, glazed tiles, concrete bases, cement:sand screeds, tongue & groove floorboarding, plywood overlay, floating plywood/chipboard floors, ceramic/quarry tile/terrazzo/hard natural stone bases, vinyl tiles/sheet, mastic asphalt, steel, glass reinforced polyester (GRP), steel and galvanised steel. Conforms to BS EN 12004, Type C, Class 1F.

 

[Perry]

alright smart a**e :lol:

 

[GazTech]

2 part flexible, along with Silicon can be used on steel,as well as timber,sets like the proverbial...you dont want to remove a floor fitted with it....it rips he wood apart....Gaz

 

[Pawelzik]

We have an adhesive that is single used a C2TE adhesive acc. to EN 12004 without tested flexibility. But it can be combined with a liquid resin dispersion and than has S2 flexibility acc. to EN 12002. I recommend this for tiles on bridges, at towers, inside tunnels and on ships.

 

[Perry]

2 part flexible, along with Silicon can be used on steel,as well as timber,sets like the proverbial...you dont want to remove a floor fitted with it....it rips he wood apart....Gaz

dont you start as well :lol: but Gaz thats the only thing i use fastflex for steel

 

[GazTech]

when do you find reason to tile onto steel pj ?

 

[Pawelzik]

E.g. stainless steel shower sink (I have seen such). Martin

 

[russ]

Ardex ardion 90 liquid goes with most of their cement range. i find it more flexible than most single part flexibles and easier to use than bal flex.

 

[GazTech]

I believe that the inner decks of ships...liners etc are all steel ( fire prevention ) and then tiled in general areas to dull the sound.....Gaz

 

[Perry]

gaz i belive dunlop invented the stuff for ship decks when the cartirdges fly out and i use it for stair risers :8:

 

[Pawelzik]

Hi gaz. Ships are difficult and each ship area has its´own tile laying rule, I will tell from my experience when this question is coming up in another forum.