2mm tile spacers

[borgie]

any1 know where i can get some 2mm T spacers from asap? i have got 60m of 8x4's to do next week. did 55m last week of the same tile with normal 2mm spacers! i've looked everywhere on the net, can only find people out of stock! cheers!

 

[DHTiling]

Can you not face peg..?

 

[Alan.P]

TradeTiler, or as Dave says, face peg them, it's all I do.

 

[doug boardley]

I'm a face pegger too

 

[DHTiling]

I'm a face pegger too

I can tell... :lol:

 

[doug boardley]

I can tell... :lol:

me on Fridays :lol:

 

[borgie]

when you say face peg. are you talking about using normal spacers, sticking 2 of them to the face , then pulling them all out afterwards? if so i did that last week. i am using 100mmx200mm tiles over a large area,60m2 and pulling all those spacers out is a lot of dead time, the tiles have wax on them, which has to be removed too and i am not on the best rate in the world. so 2mm t spacers would save me a lot of time and money. trade tilers t spacers start off at 3mm as do most other suppliers. and i am not going to start snapping 1 leg off the cross spacers either :smilewinkgrin:

 

[Stewart]

Never used T-spacers, face peg, then remove. Never leave your spacers in!

 

[DHTiling]

OK.. use these and leave them in side ways..


2 mm Peg Spacers x 1000

http://www.**************/acatalog/2peg-200.jpg
2 mm loose spacer pegs

Hollow section 30mm long

Bag of 1000 (loose)

weight 65g

from tradetiler..

 

[Andy Allen]

i always use spacer pegs just take them out as you go (once the addys dry) .

 

[andy-p]

Face peg , leaving spacers in is for amateurs.. :lol:

 

[borgie]

i think i will go with the pegs. just for the record i have never used t spacers before. as i have never had a need to. but with this contract they would make a difference. thanks all for the advice.

 

[jamie B]

I'm so mean I've NEVER left a spacer in!:lol:

 

[Pebbs]

Borgie, you still working in London? if so I'll leave a box for you in the site office to pick up on Monday morning.

This is to go someway to dispel the rumour that Im a bit of a nasty piece of work sometimes!

Lynn

 

[DHTiling]

Lynn.. NASTY.. Never..:wacky: