46m2 indoor & 40m2 outdoor 60 x 60 porcelain floor tiles Wargrave RG10 8 October

It should be to your advantage posting with so much notice to be honest. TilersForums aren't usually available next week.
 
I would like to know the approximate cost of labour for laying 60cm x 60cm porcelain floor tiles. This is in a large self build house.
Floor details:
Indoor lounge area of 46m2. Floor is anhydrite screed with low temperature underfloor heating. Both laid >2 years ago. The laitance will have been sanded off. The floor will have been given 2 coats of primer (NOT PVA).
The external wall of the room is a shallow curve of 10 x 1m glass panels. 3 indoor walls to have skirtings from cut tiles.
Adjoining outdoor deck area of 40m2. Finish is traditional screed which has been sealed with 2 coats of SBR.
Scope of work details:
All other 2nd fix work has been done on a DIY basis; so I need to know someone good who would be interested to do this job and who would give me an honest rate for the work.
If I decide to go ahead then I would agree the approach to the additional materials. l can get adhesive and grout at trade rates (due to the volume of other tiling in the property).

I am happy to answer any questions online or by message and happy to provide plan views and photos.
Frances
If you could post pictures of the procject, it may give people more of a visual understanding of what is required, 86mq2 is a decent area if it's square areas, I think if people had an idea of doorways to cut around, linear meterage of skirting detail, programme (timescale to complete the works) ect, this will will help you.

Regards
Simon
 
If you could post pictures of the procject, it may give people more of a visual understanding of what is required, 86mq2 is a decent area if it's square areas, I think if people had an idea of doorways to cut around, linear meterage of skirting detail, programme (timescale to complete the works) ect, this will will help you.

Regards
Simon


U should go read this thread Simon.
I'll link u to the most important bit which is the work her husband did
It's a diy job.

Advice please - natural sandstone - indoors on anhydrite screed
 

Advertisement

Which tile adhesive brand did you use most this year?

  • Palace

    Votes: 9 5.2%
  • Kerakoll

    Votes: 17 9.9%
  • Ardex

    Votes: 12 7.0%
  • Mapei

    Votes: 49 28.5%
  • Ultra Tile

    Votes: 21 12.2%
  • BAL

    Votes: 40 23.3%
  • Wedi

    Votes: 4 2.3%
  • Benfer

    Votes: 5 2.9%
  • Tilemaster

    Votes: 24 14.0%
  • Weber

    Votes: 19 11.0%
  • Other (any other brand not listed)

    Votes: 17 9.9%
  • Nicobond

    Votes: 8 4.7%
  • Norcros

    Votes: 2 1.2%
  • Kelmore

    Votes: 5 2.9%
Back
Top

Click Here to Register for Free / Remove Ad